EH650VC0120 Subaru Engine - Overview

This OEM flange nut in your engine is a fastener that secures different engine assemblies, like the intake system or the fuel tank. It has a wide, flat base for stability and even load distribution. With a diameter of 6 mm, a thread pitch of 1 mm, and a flange diameter of 13 mm, it is commonly found at assembly attachment points or in are...Read moreas that vibrate. You can tell if a flange nut is broken by checking for bending, cracking, or missing pieces. You may also notice loose assemblies. Not replacing a broken flange nut can lead to issues such as air or fuel leaks and a loss of engine power. To remove a damaged nut, consult your user manual for its location and use a wrench or socket to unthread it. Please note that this flange nut is sold individually, so it is essential to confirm the quantity required for your specific machine. It is also a good idea to keep some extras on hand for future repair needs.

This is an authentic Subaru/Robin replacement part. The regulator is designed by the manufacturer for use in engines. This is a complete regulator assembly, made primarily of metal, and it is used to control the amount of electricity that flows through the machine. You may require a wrench when replacing this part. This item is sold individually.

This is an authentic manufacturer made replacement part which is specially designed for use with Subaru engines. The ignition coil generates the voltage for the spark plug. This part comes with the ignition wire, module, and spark plug boot. For this installation, you will need a screwdriver to remove the any engine shrouds or covers, as well as needle nose pliers to disconnect the ignition coil from the engine.

This is a genuine Subaru and Robin replacement part for use in engines. The governor sleeve attaches to the governor gear. A hammer may be needed during the replacement of this part. It is made out of metal and will need to be replaced if it breaks. This item is sold individually.

A genuine OEM sourced replacement part which is supplied for use with Subaru / Robin engines commonly installed on lawn and garden equipment. This special gasket is utilized to create an air-tight seal for the rocker cover, over time the material tends to deteriorate and crack eventually requiring replacement to maintain the proper seal. ...Read moreIt is a high-quality component which is made of durable composite material and it is sold individually.

This cleaner element is a high quality item designed for use on Subaru/Robin engines. It is sourced from original equipment manufacturer and it is sold individually. This combo includes (1) pleated paper filter and (1) foam pre-filter element. The purpose of these filters is to remove dust and other contaminants from the air that goes into the carburetor. To replace this part no tools would be needed.

It is a genuine replacement part that is supplied by the original equipment manufacturer for use with Subaru/Robin engines commonly installed on lawn and garden equipment. This is the special component which provides an air-tight seal for the exhaust manifold, over time it may wear out and crack eventually requiring a replacement. It is a high-quality gasket which is made of durable metal and is sold individually.