EFLS627UTT0 Frigidaire Washer - Overview

This is a door latch, also known as a door strike, for some models of washing machine. This part secures to the door of the washer and secures the door when it is shut, to ensure the inside drum of the washer does not leak. If your washer does not start properly and/or shut all the way, this latch is likely causing the issues you are expe...Read moreriencing and needs to be replaced. This latch is made of a brushed metal material and features two holes to secure it with screws. To replace this latch, simply unthread the screws of the old latch to remove it, and secure the new latch with the existing screws. This latch is not sold with any other parts or accessories, so any securing screws are sold separately.

This OEM door boot helps seal the washer drum to prevent leaks. If you're seeing water or soap leaking, or notice tears in the gasket, it's time for a replacement. This part fits select washing machine models and is sold individually—clamps sold separately.

This door lock assembly is an essential component for ensuring the safe and efficient operation of your washing machine. Designed to prevent the door from opening during the wash and spin cycles, this lock assembly enhances both safety and performance. It is a genuine OEM part compatible with select Frigidaire, Electrolux, White Westingho...Read moreuse, and Tappan washing machines. The durable construction ensures reliable functionality, safeguarding against accidental openings that could disrupt your machine’s operation. If your washer door fails to lock properly, replacing this part can restore optimal performance. Before purchasing, confirm compatibility by checking your model number, as parts may vary in size and shape. Always disconnect the washer from its power source and wear protective gloves during installation to ensure safety.

This is a replacement screw for your washer or dryer. The screw is approximately half an inch in length and is a Phillips-head screw. It screws in from the outside of the drum, into the vane/baffle. The main reason you would replace this screw is if the old screw is missing or damaged. This part is sold individually and is an OEM part sourced directly from the manufacturer.

Sold individually.

This washer shock absorber mounting pin is a small but essential fastener that secures the shock absorber to the outer tub of a front-load washing machine. By holding the shock absorber firmly in place, it helps stabilize the tub during wash and spin cycles, reducing excessive vibration, shaking, and movement. Made from durable materials ...Read moreand designed for a precise fit, the pin supports smooth operation and protects other components from stress caused by unbalanced motion. Replacing a worn, broken, or missing mounting pin can help restore proper vibration control, improve washer stability, and prevent noise or damage during operation.

This OEM water inlet valve assembly with flow meter fits select Frigidaire, Electrolux, White Westinghouse, and Tappan washers. It regulates water flow for efficient operation and energy savings. Unplug the washer and shut off the water supply before installing. Refer to your owner’s manual for model-specific guidance. Verify compatibility before ordering.

This washer handle assembly is designed to replace the dispenser drawer handle on select washing machine models. Made for durability and a seamless fit, it allows for smooth operation when opening and closing the detergent drawer. To install, simply pull the drawer out from its housing and swap the old handle with the new one. Be sure to verify your appliance’s model number to ensure compatibility. Sold individually.

This boot retainer spring is a critical internal component that secures the rubber door seal (also known as the bellow) to the outer drum of the washing machine. Constructed as a corrugated tube-style clamp, it maintains the seal’s position throughout the wash cycle, preventing water leaks and ensuring proper door alignment. A compromised...Read more spring may result in water escaping from the front of the washer or the seal becoming loose. This genuine replacement part is compatible with a wide range of washing machines from Frigidaire, Electrolux, Gibson, Kelvinator, Kenmore, and other affiliated brands. Installation typically involves removing the front panel or door boot, positioning the spring evenly around the seal, and ensuring it is securely fastened to maintain a watertight fit.