Models
>
EFLS617SIW0
EFLS617SIW0 Electrolux Washer - Overview
Sections of the EFLS617SIW0
[Viewing 4 of 4]
Manuals & Care Guides for EFLS617SIW0
Click to downloadInstall
Installation Instructions
(12.44MB)
Manual
Owner's Manuals
(6.57MB)
Specs
Product Specifications Sheet
(5.08MB)
Keep searches simple, eg. "belt" or "pump".
Screw
PartSelect #: PS417463
Manufacturer #: 131302800
This is a replacement screw for your washer or dryer. The screw is approximately half an inch in length and is a Phillips-head screw. It screws in from the outside of the drum, into the vane/baffle. T...
$11.21
In Stock
Washer Outer Tub Gasket (O RING)
PartSelect #: PS12712358
Manufacturer #: 5304520351
This part is located between the front and rear outer tubs.
$76.33
In Stock
Questions And Answers for EFLS617SIW0
We're sorry, but our Q&A experts are temporarily unavailable.
Please check back later if you still haven't found the answer you need.
Sort by:
- < Prev
- 1
- Next >
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing answers that matched.Try using some different or simpler keywords, or submit your new question by using the "Ask a Question" button above!
GEORGE
September 8, 2022
WHAT ARE THE SCREWS FOR THE DOOR LATCH
PART NO, ?
For model number EFLS617SIW0
Hi George,
Thank you for your question. The part number listed under your model number for the screw that holds the door latch is PS3492749. If you need help placing an order for it, customer service is open 7 days a week and anyone will be happy to assist you. Please feel free to give us a call. We look forward to hearing from you!
Was this helpful?
Thank you for voting!
Related Parts:
Phil
October 30, 2023
On part list #36 the valve assembly what is the part number.
For model number EFLS617SIW0
Hi Phil, thank you for reaching out. The valve assembly you are looking for is part number PS11766077. Glad to be of help!
Was this helpful?
Thank you for voting!
Related Parts:
VALVE ASSEMBLY
$121.87
In Stock
Dvorah
February 28, 2024
When running the clean washer cycle I always seem to get an error (E) message. Thus it never runs a full cycle. This time I got the message with 11 minutes to go. What is going on?
Thanks,
For model number EFLS617SIW0
Hello Dvorah, thank you for getting in touch. If the error code is E11, then it indicates that the washer is taking too long to fill. We would recommend checking the inlet hoses for any clogging. If this is not the issue, we would suggest replacing the water inlet valve, part number PS11766077, to solve the problem. Glad to be of assistance!
Was this helpful?
Thank you for voting!
Related Parts:
VALVE ASSEMBLY
$121.87
In Stock
- < Prev
- 1
- Next >
Common Symptoms of the EFLS617SIW0
[Viewing 4 of 4]Lid or door won’t close
Fixed by
these parts
these parts
Show All
Leaking
Fixed by
these parts
these parts
Show All
Locking Issues
Fixed by
these parts
these parts
Show All
Will Not Start
Fixed by
these parts
these parts
Show All
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
latch broke, door wouldn't shut, washer wouldn't run - no fun
I googled the problem, read the recommendation found the part and read that it was an easy fix. Took the broken part off the door and noticed the broke off piece was in the latch on the machine. Ordered the two parts, paid the $30 2-day delivery. Parts arrived and the machine was up and runnning in under 5 minutes
Parts Used:
-
Kim from LAFAYETTE, CA
-
Difficulty Level:Very Easy
-
Total Repair Time:Less than 15 mins
-
Tools:Screw drivers
9 of 10 people
found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Door lock wouldn't.
Remove two screws on attachment plate slide door lock plate out. Disconnect wire harness. Remove two screws on back side. Then reverse the process, done!
P.S. don't pay $32 for next working day it still took 3 days to arrive. doesn't help when your leaving in two.
P.S. don't pay $32 for next working day it still took 3 days to arrive. doesn't help when your leaving in two.
Parts Used:
-
Ronald from RICHFIELD, UT
-
Difficulty Level:Very Easy
-
Total Repair Time:Less than 15 mins
-
Tools:Screw drivers
4 of 5 people
found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Broken latch/lock
Removed broken off part with screwdriver and replaced with the new. The store repair man was going to charge $129 and we were able to do it ourselves for $30.
A big thank you!
A big thank you!
Parts Used:
-
George from DAVENPORT, IA
-
Difficulty Level:Very Easy
-
Total Repair Time:Less than 15 mins
-
Tools:Screw drivers
1 person
found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!