This is a door latch, also known as a door strike, for some models of washing machine. This part secures to the door of the washer and secures the door when it is shut, to ensure the inside drum of the washer does not leak. If your washer does not start properly and/or shut all the way, this latch is likely causing the issues you are expe...Read moreriencing and needs to be replaced. This latch is made of a brushed metal material and features two holes to secure it with screws. To replace this latch, simply unthread the screws of the old latch to remove it, and secure the new latch with the existing screws. This latch is not sold with any other parts or accessories, so any securing screws are sold separately.
This door lock assembly is an essential component for ensuring the safe and efficient operation of your washing machine. Designed to prevent the door from opening during the wash and spin cycles, this lock assembly enhances both safety and performance. It is a genuine OEM part compatible with select Frigidaire, Electrolux, White Westingho...Read moreuse, and Tappan washing machines. The durable construction ensures reliable functionality, safeguarding against accidental openings that could disrupt your machine’s operation. If your washer door fails to lock properly, replacing this part can restore optimal performance. Before purchasing, confirm compatibility by checking your model number, as parts may vary in size and shape. Always disconnect the washer from its power source and wear protective gloves during installation to ensure safety.
This is a replacement screw for your washer or dryer. The screw is approximately half an inch in length and is a Phillips-head screw. It screws in from the outside of the drum, into the vane/baffle. The main reason you would replace this screw is if the old screw is missing or damaged. This part is sold individually and is an OEM part sourced directly from the manufacturer.
This washer shock absorber mounting pin is a small but essential fastener that secures the shock absorber to the outer tub of a front-load washing machine. By holding the shock absorber firmly in place, it helps stabilize the tub during wash and spin cycles, reducing excessive vibration, shaking, and movement. Made from durable materials ...Read moreand designed for a precise fit, the pin supports smooth operation and protects other components from stress caused by unbalanced motion. Replacing a worn, broken, or missing mounting pin can help restore proper vibration control, improve washer stability, and prevent noise or damage during operation.
This electronically controlled dispenser valve assembly regulates the flow of water into the detergent, bleach, and fabric softener compartments of the washer. Activated by the control board, it delivers the correct water temperature and volume based on the selected wash cycle, ensuring effective distribution of cleaning agents. A malfunc...Read moretioning valve can lead to issues such as the washer failing to fill, incorrect water levels, restricted flow, or visible leaks near the valve area. Replacing a faulty valve restores proper cycle performance and helps maintain optimal washing results. Always disconnect power and water supply before installation.
This boot retainer spring is a critical internal component that secures the rubber door seal (also known as the bellow) to the outer drum of the washing machine. Constructed as a corrugated tube-style clamp, it maintains the seal’s position throughout the wash cycle, preventing water leaks and ensuring proper door alignment. A compromised...Read more spring may result in water escaping from the front of the washer or the seal becoming loose. This genuine replacement part is compatible with a wide range of washing machines from Frigidaire, Electrolux, Gibson, Kelvinator, Kenmore, and other affiliated brands. Installation typically involves removing the front panel or door boot, positioning the spring evenly around the seal, and ensuring it is securely fastened to maintain a watertight fit.
This dispenser drawer is a genuine OEM component designed for use in select washing machines. It features separate compartments for laundry detergent, fabric softener, and bleach, ensuring each additive is released at the correct stage of the wash cycle. Engineered for compatibility and optimal performance, this part helps maintain consis...Read moretent cleaning results and supports efficient operation. Replacement may be necessary if the current drawer fails to dispense properly or retains residue after a cycle. Installation is straightforward and restores full functionality to the appliance’s dispensing system.
This washer drive belt transfers power from the motor to the drive system, allowing the washer drum to tumble and spin properly during cycles. It helps restore normal operation when the washer will not spin, makes unusual noises, leaves clothes overly wet, or shows signs of belt wear such as cracking or stretching. Designed for reliable performance, this replacement belt supports smooth, consistent washer operation.
Ask our experts a question about this model and we'll get back to you as soon as possible!
We may have answered a similar question already! Search questions and answers left by others using simple keywords like "fit", "broken", "easy", or "quality" to find questions that match.
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Sort by:
Prev
1
2
Next
Sorry, we couldn't find any existing answers that matched.Try using some different or simpler keywords, or submit your new question by using the "Ask a Question" button above!
Tom - For model number EFLS517STT0
November 28, 2019
When unit starts to drain water it partially drains then unit turns off.
Hello Tom, Thank you for the question. This could be an issue with a defective Drain Pump PartSelect Number PS12365827. I would suggest cleaning out the pump and hose before replacing the pump. Hope this helps!
after replacing main control board, washer worked well for about a month, now cycles normally but now when tumbling or spinning, starts to turn but then stops
Hi Nick,
Thank you for your question. If the washer is not tumbling or spinning, the belt may be worn or broken and it will need to be replaced. The part number for the belt is PS2349239. We hope this helps!
washer was not cycling properly, replaced control board, worked for a month, belt is fine, fills & cycles fine but when time to tumble or spin, motor starts then stops
Hi Nick, Thank you for writing. This can indicate a faulty Board, Wiring or a Motor. They would need to be checked for continuity or wear. We hope this helps!
Our washer is just over a year old. It is leaking water during the wash cycle, not a lot, likely 1/4" cup. The leaking water seams to be coming from under the machine, more on the left side (at least that is the side the water is coming from under the machine). Any help is greatly appreciated. I was thinking of buying cameras and setting them up under the machine to see where it was leaking but maybe you could help before i put a camera in a wet location. Thanks.
Hello Brian, thank you for your question. The most likely cause of that leak is the door gasket that seals the water in the tub. The bellow can become cracked, or torn. Alot of times items left in pockets can get down in the crease of the bellow and cause pin holes as well. We would recommend inspecting the bellow to determine if the water is coming from there. I hope this helps.
Hello Richard, thank you for contacting us. The washer circulation pump is part number PS12365825, and the washer drain pump is part number PS12365827. If you require assistance to place an order, please contact customer service. We hope that helps!
See how others fixed this model. Time, tools, difficulty, and steps that lead to victory!View More
Search repair tips from other customers using simple keywords like "replace", "fit", "remove", "inspect". DIY doesn't mean you have to do it alone!
Search filter:
Clear Filter
Your search term must have 3 or more characters.
latch broke, door wouldn't shut, washer wouldn't run - no fun
21 of 26 peoplefound this instruction helpful.
Kim from LAFAYETTE, CA
Very Easy
Less than 15 mins
Screw drivers
I googled the problem, read the recommendation found the part and read that it was an easy fix. Took the broken part off the door and noticed the broke off piece was in the latch on the machine. Ordered the two parts, paid the $30 2-day delivery. Parts arrived and the machine was up and runnning in under 5 minutes
Remove two screws on attachment plate slide door lock plate out. Disconnect wire harness. Remove two screws on back side. Then reverse the process, done!
P.S. don't pay $32 for next working day it still took 3 days to arrive. doesn't help when your leaving in two.
Was this helpful?
Thank you for voting!
Washer door always needed to be slammed to shut and finally the latch broke.
7 of 10 peoplefound this instruction helpful.
Carol from ORLEANS, MA
Very Easy
Less than 15 mins
Screw drivers
Unscrewed the two screws holding the latch and screwed on the new one. Took less than 5 minutes. The best part was that I ordered the latch on Friday and it was delivered on Saturday!