ED5FVGXWS01 Whirlpool Refrigerator - Instructions
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Auger was broken
Went as planned. Video was such a great help. Delivery was in world record time. Price was right. Will use you again.
Parts Used:
-
Russell from East Greenwich, RI
-
Difficulty Level:Really Easy
-
Total Repair Time:15 - 30 mins
-
Tools:Nutdriver, Pliers, Screw drivers
Was this instruction helpful to you?
Thank you for voting!
Freezer not cooling.
-
David from Ringwood, IL
-
Difficulty Level:Easy
-
Total Repair Time:15 - 30 mins
-
Tools:Nutdriver, Screw drivers
Was this instruction helpful to you?
Thank you for voting!
slide rail on the drawer broke
took out old drawer, slid in new drawer and transfered food
Parts Used:
-
Douglas from San Diego, CA
-
Difficulty Level:Really Easy
-
Total Repair Time:Less than 15 mins
Was this instruction helpful to you?
Thank you for voting!
Thermostate would either Stick "ON" or "OFF"
Unplugged Refer...Cleared top shelf...removed screws/covers to expose thermostate and capilary tube...removed old thermostate takeing care to notice how Capilary tube was routed and electrical connection were made (wire color coding)...removed sheath on old capilary tube and installed on new, always making sure to not "kink" tubing...installed new part just as the old one was...plugged refer back in and enjoyed trouble free operation.
Parts Used:
-
Richard from Sunnyside, WA
-
Difficulty Level:Really Easy
-
Total Repair Time:30 - 60 mins
-
Tools:Nutdriver, Pliers, Screw drivers
Was this instruction helpful to you?
Thank you for voting!
Ice Maker quit making ice
Read about others with same problem, Found part on line, Ordered, got in few days, replaced. Now we have ice again.
Parts Used:
-
Sandy from Pueblo, CO
-
Difficulty Level:Easy
-
Total Repair Time:Less than 15 mins
-
Tools:Screw drivers
Was this instruction helpful to you?
Thank you for voting!
icemaker was leaking
it took 10 minutes.pulled old ice maker out.Found out the wiring harness was not going to work.swapped the two out.plugged inn and slid new ice maker in place.it's something I should have done months ago.
Parts Used:
-
james from grand rapids, MI
-
Difficulty Level:Really Easy
-
Total Repair Time:Less than 15 mins
-
Tools:Screw drivers
Was this instruction helpful to you?
Thank you for voting!
My icemaker stopped making ice
My parts shoewd up in just two days, the installation only took about fifteen minutes and only required a nut driver. My new icemaker was making ice within the first hour of installing it. I am very sattisfied with the delivery and the icemaker itself. V/R Richard S
Parts Used:
-
Richard from Santee, CA
-
Difficulty Level:Really Easy
-
Total Repair Time:Less than 15 mins
-
Tools:Screw drivers
Was this instruction helpful to you?
Thank you for voting!
Light bulb failure
Received the part the day after ordering. Appreciated the quick service and repair took less than a minute.
Parts Used:
-
Grant from Alexandria, VA
-
Difficulty Level:Really Easy
-
Total Repair Time:Less than 15 mins
Was this instruction helpful to you?
Thank you for voting!
freezer forming ice on back panel, fridge nor freezer getting cold
Watched video of repair. Took all drawers and drawer holders out of freezer to acesss back panel. Removed 6 screws from back panel,slid up and out. Cut 2 wires to remove old bi-mtl defroster. splice the wires and attached new bi-metal def.
Parts Used:
-
Frank from Alabaster, AL
-
Difficulty Level:Easy
-
Total Repair Time:15 - 30 mins
-
Tools:Screw drivers
Was this instruction helpful to you?
Thank you for voting!
Part broke inside ice cube tray
Using instructions found on the internet and the illustrated parts breakdown it was just a matter of following instructions.
Parts Used:
-
Loren from Reeds Spring, MO
-
Difficulty Level:Really Easy
-
Total Repair Time:15 - 30 mins
-
Tools:Nutdriver, Pliers
Was this instruction helpful to you?
Thank you for voting!
ice maker making no ice
replaced ice maker took longer to get into crawl space to turn water off and on then to change out ice maker started making ice in about an hour.
Parts Used:
-
wallace from Cheyenne, WY
-
Difficulty Level:Really Easy
-
Total Repair Time:Less than 15 mins
-
Tools:Nutdriver
Was this instruction helpful to you?
Thank you for voting!
Bin-cntlvr cracked when I dropped it.
Very easy you pullup and the old bin snaps out.Then you align the new bin to the notches on both sides.then very easily push down on the new bin.And the job is finished.
Parts Used:
-
ROCCO from BETHPAGE, NY
-
Difficulty Level:Really Easy
-
Total Repair Time:Less than 15 mins
Was this instruction helpful to you?
Thank you for voting!
Plastic Ice Guide in door broke
Align new Ice Guide with two upper tab holes and push into place. Then push bottom tab into bottom hole until it snaps into place.
Parts Used:
-
James from Fair Oaks Ranch, TX
-
Difficulty Level:Really Easy
-
Total Repair Time:Less than 15 mins
Was this instruction helpful to you?
Thank you for voting!