ECH440-3011 Kohler Engine - Overview

This manufacturer-supplied replacement part is designed for use with Kohler engines commonly installed on lawn and garden equipment. The bushing helps to secure the throttle linkage. It provides an identical replacement for a missing or a faulty hardware that was installed on a new unit. Please refer to the appropriate diagrams of your mo...Read moredel for the exact location and the correct installation of this part. Keep in mind this high-quality bushing is made of durable plastic and is sold individually. You will need a wrench set to remove the housing in order to gain access to the bushing.

This replacement fuel pump is a genuine OEM supplied item that is commonly utilzed on Kohler engines installed on lawn and garden equipment. It is used to pump the fuel from the tank into the carburetor. Over time it may begin to fail eventually requiring replacement, it is recommended to periodically check for hairline cracks and other d...Read moreamage to the external surfaces of the pump. Please note one durable plastic body fuel pump is included per order.

Designed to secure parts in place and spread the load, this Flange or Lock Nut is made of durable metal, is silver, is not part of a kit or assembly, and is sold individually. This part has been sourced directly from the original manufacturer. When the threads or ends become damaged or worn, it will no longer be able to hold pieces in p...Read morelace. At which point, it should be replaced. Refer to your owner's manual to determine if this is the correct part, as it is located in various locations on some machines. Customers rate this repair as Easy.

This is an authentic manufacturer-sourced replacement part. This pre-cleaner element is commonly found on a Kohler Engine. The element is used to filter out dirt and debris that can clog an engine or carburetor and prevent it from working properly. This is a foam filter and is sold separately.

In-line fuel filter

Hose clamp. This clamp replaces 25 237 14-S

This is an original Kohler replacement part. The oil fill cap is designed by the manufacturer for use in engines. This part is made of high-quality plastic, and is placed in the closure plate assembly to cover the nozzle where oil is added. No tools are required when replacing this item. Simply remove the old part and slot the new on into place. This part is sold individually.

This low-permeating fuel hose is a genuine OEM replacement designed for use on small engines. It carries fuel safely and efficiently from the tank to the carburetor while minimizing fuel vapor loss and resisting degradation from modern gasoline blends. Made from durable, fuel-resistant material, it’s intended to be cut to length during in...Read morestallation and is an ideal replacement when original fuel lines become brittle, cracked, or start leaking, helping restore safe and reliable engine operation.

This is an original Kohler replacement part. The muffler gasket is designed by the manufacturer for use in engines. This part is made of flexible plastic, and is used to seal the connection between the crankcase and the muffler assembly. You may require a wrench or screwdriver when replacing this item. This part is sold individually.