EB9FVBXVB00 Whirlpool Refrigerator - Parts

This defrost thermostat is a temperature sensing mechanism used in freezers and refrigerators. The thermostat senses the rise in evaporator temperature during a defrost cycle and turns the defrost heater off once frost is melted from the coils. If the freezer is not defrosting, or the freezer section is too warm, it is best to replace the...Read more thermostat to fix the problem. The tools needed for this project are: 1/4 inch nut driver, flat blade screwdriver, needle nose pliers, wire strippers, and pair of wire nuts. Remember to unplug your appliance from the power source for safety and refer to the manual provided by the manufacturer for installation instructions.

This is an evaporator fan motor, it is 115 volts and 60 hertz and it is for your refrigerator/freezer. You will need to replace this part if your appliance is too warm or getting noisy. This evaporator fan motor is located in the back of the freezer. This part circulates air over the refrigerator coils. These coils will convert the heat i...Read morento cool air, which is then circulated throughout your appliance. To replace this part you will need a 1/4-inch nut driver and a pair of needle nose pliers.

If there is ice build-up in the freezer you may need to replace the defrost timer.

Sold individually.

Appliance spray paint is a great way to cover up any chips and scratches that have appeared on your appliances. Instead of replacing the part entirely, this is an easy fix. This is also a great way to give a fresh new look to any handles or areas that have discoloring due to wear. Make sure to clean the area before you begin and wear a pr...Read moreotective mask for safety. Give the can a good shake and spray a few inches away from the surface. Apply the paint until the area is fully covered as desired. Wait until the paint has dried before using the appliance.

This screw is sold individually.

This glass shelf insert is designed to sit above the crisper drawers in select refrigerators, providing a stable and removable surface for organizing fruits and vegetables. Made from durable tempered glass, it helps maintain freshness by creating a sealed environment below. Measuring approximately 24 inches wide and 13 inches deep, it ins...Read moretalls easily without tools and serves as a reliable replacement for damaged or missing shelves. This component is sold individually and does not include framing or support hardware.

This kit comes with the icemaker, shut off arm, water valve and fill tube.

This screw is a little under an inch long and is made of metal. It is used with a refrigerator's ice maker assembly. Sold individually.

This part is the replacement door handle mounting screw for your refrigerator. The head is approximately 3/4 inch in diameter and the screw is approximately 3/4 inch in length. It is made of metal, is red in color, and is sold individually. The door handle mounting screw allows you to connect your door handle to the refrigerator door. This part is an authentic OEM part sourced directly from the manufacturer.

This Refrigerator Dairy Door is a genuine replacement cover designed to protect dairy items stored in the door bin, such as butter, cheese, and yogurt. Made from clear, durable plastic, it helps maintain a slightly cooler environment within the compartment to preserve freshness. The approximate dimensions are 11" wide by 7" high, with tec...Read morehnical specifications listed as about 11.75" L x 5.25" W x 5.75" H. Installation is simple—just snap the cover into place on the designated bin.

This wheel is sold individually - purchase quantity needed.