Terminal block kits are also known as terminal boards, or terminal strips, and they are found in a wide variety of household appliances. Most often in ranges, wall ovens, and dryers. This kit attaches the power cord to the inner wiring of your appliance. If the terminal block is faulty, your appliance will not get the power it needs to op...Read moreerate properly. When removing the old block pay close attention to the wire placement, this will make installing your new part much easier. If you notice any of the wires or wire terminals are corroded or damaged they will also need to be replaced.
This dual radiant surface element is designed for electric ranges and cooktops, offering two heating zones—9 inches and 6 inches—to accommodate a variety of cookware sizes. It delivers consistent, even heat for efficient cooking and serves as a direct replacement for damaged or underperforming elements. Operating at 240 volts, the unit fe...Read moreatures a durable all-metal temperature control rod that enhances heat stability and longevity. Compatible with multiple models across several brands, this component is ideal for restoring optimal performance to your cooktop. Installation should be performed with the appliance disconnected from power and may require basic tools.
This infinite control switch regulates power to a surface burner, allowing smooth and adjustable heat control. Reliable switching improves cooking accuracy and safety. Replacing a faulty switch helps restore consistent burner operation.
This 6-inch surface heating element delivers steady, even heat for everyday cooking tasks. Designed for consistent performance, it is commonly replaced when a burner fails to heat, heats unevenly, or stops working entirely, restoring dependable cooking functionality.
This dual radiant surface bridge element is designed to supply consistent heat to the cooking surface of electric ranges and cooktops. Positioned beneath the glass top, it warms through a radiant coil to support a variety of cooking tasks. With a power rating of 1800/2600 watts, it’s ideal for replacing a failed heating element and restor...Read moreing full functionality. Compatible with multiple appliance brands, this part should be installed only after disconnecting the appliance from its power source.
See how others fixed this model. Time, tools, difficulty, and steps that lead to victory!View More
Search repair tips from other customers using simple keywords like "replace", "fit", "remove", "inspect". DIY doesn't mean you have to do it alone!
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Cord was not tightened enough by delivery crew.
109 of 174 peoplefound this instruction helpful.
Timothy from Spring Valley, AL
Really Easy
15 - 30 mins
Screw drivers, Socket set
PF alarm appeared on display. Noticed clicking when cord was moved. Had arced for some time and melted original block. New part slightly different. Only has 3 lugs, old one had six. Stack using washers provided. Take note of colors before disassembly. Use caution while working through access opening. The edges are sharp. Only tools neede
... Read mored are phillips screwdriver, deep socket for lug nuts. Nut driver optional. Hope this is helpful.
Read less
Was this helpful?
Thank you for voting!
Burned element
65 of 120 peoplefound this instruction helpful.
Tom from Wallingford, CT
Really Easy
Less than 15 mins
Nutdriver, Screw drivers
Flip up top, remove wires and two screws. Replace in opposite way. Turn off power to stove first.
Was this helpful?
Thank you for voting!
Old element connections different from new element
11 of 14 peoplefound this instruction helpful.
Frederic from KILLEEN, TX
A Bit Difficult
30 - 60 mins
Pliers, Screw drivers, Socket set
Disconnected power at breaker. Removed cooktop mounting screws, lifted top and propped in up position. Removed two screws and lowered two front burners mounting frame. Wiggled dual element free at the clips and proceeded to swap wires one at a time and realized the difference with connectors 1a and 2b much later when only the center porti
... Read moreon was heating up. Finally figured out the problem and everything works as advertised. Pay attention if you own a Kenmore product.