E30MO65GSSA Electrolux Microwave - Overview

Diagrams for E30MO65GSSA

See every part. Know exactly what you need.

Parts for the E30MO65GSSA

$70.26

SWITCH

Part #5304493153

The relay switch may also be known as the door micro switch and is a part for your microwave. The function of this part is to monitor the door latch and communicate whether the door latch is open or closed to the electronic control board. Before making this repair, you will want to make sure to unplug your microwave and discharge the capa...Read more

Read less

$41.75

Microwave Surface Light Bulb

★★★★★

(6)

Part #5304461116

This light bulb is for microwaves. Light bulb illuminates the surface below the microwave or the interior of the microwave. Because high-voltage capacitors in a microwave can retain a lethal electrical charge even when the microwave is unplugged, a service technician should install this part unless the owner's manual includes instructions for installing the light bulbs.

$26.26

Screw - 4 mm x 8 mm

Part #5304451561

$26.35

SCREW

Part #5304414648

$31.13

SPRING

Part #5304440831

$23.60

Microwave Screw

Part #5304451553

$171.75

Microwave Cover

Part #5304461165

Struggling with a malfunctioning appliance? Let?s get it back to peak performance with a GE GASKET PAN CRV REAR. This is the reliable, long-lasting solution you?ve been looking for to restore your appliance. Crafted by GE, a name synonymous with superior quality, you can trust this gasket pan to fit your appliance like a glove. It's des...Read more

Read less

$114.35

High Voltage Capacitor

Part #5304470539

COUPLER

★★★★★

(1)

Part #5304469899

$88.68

MOTOR

Part #5304498736

$58.64

RECEPTACLE

Part #5303319561

$22.52

SCREW

Part #5303319641

Manuals & Care Guides for E30MO65GSSA

Click to download

Install

Installation Instructions

(0.8MB)

Install

Installation Instructions

Common Symptoms of the E30MO65GSSA

How this model fails, and the parts that fix it.

Repair Tips From Fixers Like You

See how others fixed this model. Time, tools, difficulty, and steps that lead to victory! View More

Timer would run but the microwave won't start

91 of 149 people found this instruction helpful.

Tim from Chicago, IL
Easy
30 - 60 mins
Screw drivers

I first removed the top plate above the microwave door (3 screws), then I removed the plate containing the buttons and clock. The microwave has 3 relay switches and they are in a little holder. The holder was too difficult to remove so I just removed the bottom switch and replaced. The microwave started right up.

Was this helpful?

microwave wouldn't turn on but timer worked.

35 of 64 people found this instruction helpful.

Steve from Moorhead, MN
Easy
Less than 15 mins
Pliers, Screw drivers

was told buy a repair person to check the door micro switches as it was a common problem. removed the top plastic air grill to get access to the screw that holds in place the control cover. After unplugging the unit, i took out the (2) screws that held in the switches and removed them (3). One switch was a bit melted so i tested it with a ... Read more

Read less

Was this helpful?

Microwave would count down but not run

29 of 49 people found this instruction helpful.

Betty from Kimball, TN
Easy
15 - 30 mins
Pliers, Screw drivers

After unplugging the unit remove the control face buy removing the screws. All three door switchs are on a bracket on the left. Remove the two screws holding the bracket in place and pull out. Disconnect the wires from the three switches and test each switch indivually to determine the bad one. I used a multimeter set on ohms.Replace the ... Read more

Read less

Was this helpful?