My Orders
DXPW3228 (Type 0) DeWALT Pressure Washer - Overview
_WW_1.gif "Page A Diagram and Parts List for Type 0 DeWALT Pressure Washer")
_WW_2.gif "Page B Diagram and Parts List for Type 0 DeWALT Pressure Washer")
Enter a part description. DIY Heroes keep it simple, eg. "belt" or "pump".
Search filter:
Clear Filter
Your search term must have 3 or more characters.
$53.81
In Stock
Soap Injector Kit
Part #5140117-47
It is an authentic part that is supplied by the original equipment manufacturer. This kit is designed for use with DeWALT pressure washers. This is the special component that the soap injector hose connects to. The kit includes one durable metal injector body, the spring and the ball. It provides an identical replacement for a faulty or a...Read more missing item that was installed on a new unit. Refer to the owners manual and the diagrams of your model for the exact location and the correct application of this soap injector kit. You will need an adjustable wrench to perform this repair.
Read less
$55.42
On Order
Valve Thermal Relief
Part #5140095-85
This thermal relief valve is a genuine part produced by the original manufacturer for DeWALT pressure washers. The valve connects to the pump and protects it from overheating. If the pump gets too hot this valve will pop out to release extra pressure, and prevent excessive damage to the pump. It is an identical replacement for a damaged o...Read morer a missing component that was installed on a new unit. Note, one durable metal thermal relief valve is included. To replace it you will need an adjustable wrench. Make sure to release the pressure from the tank before starting the repair.
Read less
$54.18
In Stock
Valve Kit
Part #5140117-46
This item is a genuine OEM sourced replacement valve kit designed for use with Dewalt pressure washers. This kit includes three (3) inner and three (3) outer valves that fit in the pump. These valve are made out of plastic with metal and they include rubber o-rings. To complete this repair you will need a set of wrenches and a screwdriver.
$137.47
In Stock
Pressure Seal Kit
Part #5140117-51
It is a genuine OEM pressure seal kit which is designed for DeWALT pressure washers. The components are utilized to ensure tight seals between connected parts, preventing water from leaking past the high-pressure side of the piston. Over time seals will wear out and may begin to crack causing water leaks and eventually requiring replaceme...Read morents. The kit contains the necessary parts to maintain or repair your pump. Make sure to check the owner's manual repair guide and the diagrams of your model for the correct installation of the new components. Keep in mind this pressure seal kit is sold as an individual item. To perform this repair a wrench set and a screwdriver will be necessary to take apart and reassemble the pump.
Read less
$154.07
In Stock
Wheel Assy.
Part #5140112-51
This is an authentic DeWalt replacement part, sourced from the original manufacturer for use with pressure washers. The wheel assembly is a complete part that includes the tire, rim, and lock rings. The wheel connects to the frame and is used to mobilize the machine. The wheel assembly is sold individually, please note two may be required.
$51.90
In Stock
$45.65
In Stock
$54.28
In Stock
Foot
Part #5140095-03
This genuine OEM part is made to fit the DeWALT machines listed below. This rubber foot attaches to the underside of the frame, dampening vibrations and keeping the machine stable while protecting surfaces beneath. One (1) foot and one (1) Torx screw are included.
$47.97
Special Order
Lance
Part #5140095-94
The lance attaches to the gun. This is an authentic DeWALT replacement part that is sourced from the original manufacturer for use with pressure washers. This part is made of metal and sold individually. When replacing this item no tools should be needed. It may become bent or broken and will need to be replaced.
No Longer Available
Nozzle Cleaning Tool
Part #5140110-40
This is an authentic replacement part sourced directly from the manufacturer. The nozzle cleaning tools is commonly found with DeWALT pressure washers. This part is made of metal, and is an identical replacement for the tool that originally came with the machine. It is used to remove debris that may build up in the spray nozzle. This item is available as an individual replacement part.
$41.15
In Stock
Water Inlet Screen
Part #5140117-54
This water inlet screen is a genuine OEM replacement part sourced directly from the manufacturer. It is designed for use with several models of DeWALT pressure washers. This part is placed just outside the water inlet connector. A screwdriver is needed to replace this part. This is a simple installation process that should only take a few minutes.
$61.47
Special Order
Hose Chemical
Part #5140094-96
This is a genuine DeWalt replacement part that has been sourced from the original manufacturer to be used with pressure washers. The clear plastic hose is used to carry detergent from the chemical tank to the pump assembly. This item is sold as an individual replacement part.
Common Symptoms of the DXPW3228
How this model fails, and the parts that fix it.
See how others fixed this model. Time, tools, difficulty, and steps that lead to victory!
View More
Search repair tips from other customers using simple keywords like "replace", "fit", "remove", "inspect". DIY doesn't mean you have to do it alone!
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Pressure washer came up to pressure ,squeeze trigger, total pressure loss
6 of 9 people
found this instruction helpful.
This is on a dewalt pressure washer with A 8.7 12 pump and Honda motor. Removed brass housing taking really good notes of how seals were placed Into housing
This pump is a triplex pump. Removed 3 brass Allen head plugs to expose the 3 checks and the other 3 checks are at the bottom of other 3 ports where the 3 pistons go in.
Us ... Read more ed a needle nose plies to remove checks..Removed seals from piston ports. I used a Oring lubricant to assemble THE NEW SEALS THAT GO IN FIRST WERE VERY VERY HARD TO INSTALL HAD TO PUSH THEM IN THEN SLOWLY WORKED AROUND THE EDGE OF SEAL SLOWLY WORKING DOWN INTO BORE OF HOUSING
THE rest of parts install went easy Bolted unit up,pulled starter rope to rotate pump an motor ok so far
Hooked up water started motor and cleaned items I had out to do. Hope info helps
This pump is a triplex pump. Removed 3 brass Allen head plugs to expose the 3 checks and the other 3 checks are at the bottom of other 3 ports where the 3 pistons go in.
Us ... Read more ed a needle nose plies to remove checks..Removed seals from piston ports. I used a Oring lubricant to assemble THE NEW SEALS THAT GO IN FIRST WERE VERY VERY HARD TO INSTALL HAD TO PUSH THEM IN THEN SLOWLY WORKED AROUND THE EDGE OF SEAL SLOWLY WORKING DOWN INTO BORE OF HOUSING
THE rest of parts install went easy Bolted unit up,pulled starter rope to rotate pump an motor ok so far
Hooked up water started motor and cleaned items I had out to do. Hope info helps
Read less
Other Parts Used:
Was this helpful?
Thank you for voting!