DWS779R (Type 30) DeWALT Miter Saw - Overview

This is a genuine Dewalt replacement part, it is sold individually. The purpose of the Blade Adapter, is to make the bore of a blade that is 1 inch and reduce to a 5/8 inch bore. Making it possible to use a 1 inch bore blade on a 5/8 inch arbor.

This is a genuine manufacturer sourced replacement part designed for use with Dewalt miter saws. This wear plate helps to minimize the friction and avoid potential wear to the table assembly. It is made out of plastic and it is sold individually.

This replacement screw is a high quality hardware commonly utilized on Bostitch, Black and Decker, Porter Cable and Dewalt equipment. This is a authentic OEM item which has multiple applications depending on the unit, for correct location and use of this screw make sure to check appropriate diagrams. Please note this torx screw is sold individually.

This is a genuine manufacturer-approved replacement part which is specially designed for DeWALT saws. Bushings are generally utilized to provide a tight fit between connected components while allowing for movement with minimum friction. If the bushing is damaged or is missing, this will provide an identical replacement for the original ha...Read morerdware that was installed on a new unit. Refer to the appropriate diagrams for your model to ensure the proper repair procedure. Note, this high-quality part is sold individually.

Genuine Dewalt replacement part, this item is sold individually. The purpose of the 394589-01 Screw is used to secure the pivot plate on the Miter Saws listed below. You can use a flat blade screwdriver or a Torx T-30 bit on this screw.

It is a genuine item that is supplied directly from the original manufacturer for use with DeWALT compound miter saws. The lever provides a user with a comfortable grip to lock the bevel at the desired angle. It provides an identical replacement for a faulty or a missing component that was installed on a new unit. To ensure the correct in...Read morestallation of this lever, refer to the diagrams of your model. One durable plastic part is included. Note, the hardware to secure it is sold separately. You will need a socket wrench to remove and resecure the nut that holds this lever.

This is a genuine manufacturer-sourced component which is specially made for DeWALT saws. It provides an identical replacement for a missing or a faulty part that was installed on a new unit. The purpose of the part #153555-00 belt is to drive the gear assembly that connects to the drive shaft to rotate the blade. Unfortuanetly, over time...Read more it can wear out, break or get stretched eventually requiring a replacement to ensure peak performance. Keep in mind this high-quality belt is made of durable rubber and is sold individually. We have an article and video on how to do this repair. Quick Fix: How to Replace the Belt on a DeWalt DW708 Miter Saw .

Genuine Dewalt replacement part This brush is sold individually, 2 are needed for the tools shown below It is always best to replace both brushes, even if only one is worn. Worn brushes frequently are the cause behind a motor running poorly. Replacing brushes can fix a motor that's operating intermittently. New brushes can restore a ...Read moremotor's electric braking. Carbon brushes are one of the most commonly replaced power tool parts. This is because carbon brushes are wear items, meaning that through friction and use they will gradually wear away until they need replacing. Worn brushes are a common causes of intermittent motor function, reduced electric braking and reduced motor power. A worn-out brush will often be worn down near to the wire lead and can be cracked, pitted, or burned. When replacing carbon brushes, be sure to inspect your armature for burns, cracks, or other damage which can indicate larger motor problems.

This is a genuine OEM sourced replacement part designed for use with a variety of power tools. This is a standard hardware which has multiple applications based on your tool. For proper use please refer to diagrams. This is a metal torx T20 metal screw which is sold individually.