DWE6421-B2 (Type 1) DeWALT Orbital or Palm Sander - Overview

This authentic OEM belt is specially designed for use in sanders. It is a looped, flexible strip made of rubber that is responsible for controlling the movement of the sanding pad. Over time, the belt can wear out, lose elasticity, or break due to regular use or improper installation. When the belt fails, the sanding pad will become unsta...Read moreble and may stop spinning altogether or exhibit erratic movement, resulting in inefficient and inconsistent sanding. To begin the repair, first, unplug the sander and remove the fasteners that secure the housing cover. Locate the old belt and note how it is routed before removing it from the sander. Position the new belt in the sander and ensure that it is aligned and adequately tensioned. Reattach the housing cover and secure it with the appropriate screws.

This genuine OEM pad assembly—also known as a hook-and-loop sanding pad or sanding disc—is designed for use with compatible sanders and sourced directly from the original manufacturer. The circular pad measures 4.75 inches in diameter, features 8 dust extraction holes, and includes a Velcro backing to securely hold sandpaper discs in plac...Read moree during operation. Mounted to the base of the sander, this pad allows for smooth, efficient sanding and consistent surface finishing. Over time, the Velcro surface may wear down, or the pad may become cracked or stripped, leading to poor sandpaper grip, uneven sanding, or reduced performance. Replacing the pad is a simple repair that requires no specialized tools. To install, use a screwdriver to remove the retaining screws from the old pad. Align the new pad assembly with the mounting holes and secure it using the original or replacement screws. It’s recommended to inspect and replace any stripped or corroded screws during installation for best results. This part is sold individually and is ideal for restoring your sander’s performance and extending its service life.

This replacement screw is a high quality hardware commonly utilized on Bostitch, Black and Decker, Porter Cable and Dewalt equipment. This is a authentic OEM item which has multiple applications depending on the unit, for correct location and use of this screw make sure to check appropriate diagrams. Please note this torx screw is sold individually.

This genuine cord protector, also known as a strain relief boot, is designed to safeguard the power cord where it enters your tool housing. Made from flexible, durable material, it helps prevent the cord from bending, twisting, or fraying during regular use, supporting safe and reliable performance. Small but essential, this component is ...Read morean effective replacement if the original protector is worn or damaged, helping extend the life of your tool and maintain proper cord alignment.