DW998QDK (Type 1) DeWALT Cordless Drill - Overview

This is an authentic manufacturer approved replacement part designed for use with drills/screwdrivers. This clutch assembly is connected to the transmission and the shaft. Keeping an eye on equipment performance will determine when the clutch requires replacement. Includes part numbers 176842-00, 89210-00

This is an authentic replacement part that is sourced from the original manufacturer for use with hedge trimmers. The special screw is commonly used to secure the front guard assembly. This screw is sold as an individual replacement part, please note four screws may be required.

Genuine Dewalt replacement part, this item is sold individually. The 696631-00 Steel Ball is part of the chuck assembly of the Impact Drivers shown below. When you pull back the sleeve of the chuck assembly and insert your bit, the Steel Ball is the part that locks the bit in the chuck assembly. In the Screw Drivers listed below this is the part that secures the Bit Holder in the spindle.

This synthetic gear grease is used to lubricate internal gears in power tools, reducing friction, wear, and noise during operation. Its high-performance formula helps prevent corrosion and protects moving parts under load. Applying fresh grease during maintenance restores smooth gear movement and extends tool life.

This item is a genuine DeWalt replacement part that is intended to be used with cordless drills and drivers. The bit clip can be used as a direct replacement of the original clip that would have been installed on a new drill. The clip snaps onto the side of drill's housing and is used to store frequently used drill bits. This item is priced as a single replacement part.

The spindle is the central component which drives the bit holder. Unfortunately, over time it may wear out or it can get damaged eventually requiring a replacement. It is supplied from the original equipment manufacturer for Black and Decker and DeWALT drills. To ensure the correct repair procedure, refer to the diagrams for your specific...Read more model. Note, it is made of durable metal and is sold as an individual item. A screwdriver and pliers might be needed to replace this output spindle.

This retainer, also known as a retaining ring or split ring, is a genuine OEM replacement part used in cordless drills. It is responsible for securing the spindle within the clutch housing so that it remains stable during use and ensuring the components such as gears and bearings do not slide off the spindle. Over time the retainer may cr...Read moreack, corrode, or fall off, leading to wobbly parts and excessive vibration. Ensure the drill is off before beginning the replacement. Remove the chuck, and clutch housing. Use a set of pliers to remove the retainer from its groove. Clean the mounting surface and place the new ring in the groove on the spindle. Reassemble the drill components in reverse order.

This is an authentic OEM part. The DeWALT shifter is composed of nylon and metal components. This item is made for use with many cordless drill tools. The shifter allows the operator to switch from first to second gear on the device's transmission. This part is fitted in the clamshell set and secured onto the spring (144658-00). The shifter is sold individually. A Torx screwdriver is necessary for the repair.