DW80J9945US (AC-0002) Samsung Dishwasher - Overview
Sections of the DW80J9945US
[Viewing 1 of 1]
Keep searches simple, eg. "belt" or "pump".
Install Bracket
PartSelect #: PS10058975
Manufacturer #: DD61-00465A
This genuine OEM installation bracket, or mounting bracket, anchors the appliance to the surrounding cabinets, so that it stays in place and does not shift during operation. They hold the unit under t...
$6.40
In Stock
Door Guide Cap
PartSelect #: PS12721288
Manufacturer #: DD67-00113B
This dishwasher door cap guide is a genuine OEM replacement designed for Samsung WaterWall dishwashers. The door cap guide serves an aesthetic purpose by hiding mounting screws or other hardware on th...
$6.40
In Stock
Dishwasher Tub Gasket
PartSelect #: PS10058976
Manufacturer #: DD62-00097B
The tub gasket creates a watertight seal between the dishwasher tub and door.
$117.51
In Stock
Tapping Screw
PartSelect #: PS4133205
Manufacturer #: 6002-000520
This manufacturer-approved screw is for refrigerators, including Kenmore refrigerator model. Avoid cross-threading refrigerator screw during installation.
$6.40
In Stock
Motor Pump Oil Shaft Seal
PartSelect #: PS4222439
Manufacturer #: DD62-00053A
SEAL-OIL;DMR78,NBR,BLK,R
$52.67
In Stock
Leveling Leg
PartSelect #: PS9606365
Manufacturer #: DD61-00331B
Optimize your kitchen with the genuine Samsung Foot Free Standing. Designed specifically for select Samsung dishwashers, this product levels your appliance, ensuring optimal performance. It serves as ...
$30.53
In Stock
VALVE-WATER
PartSelect #: PS4209101
Manufacturer #: DC62-30314L
200 PSI Sizes 2"-12", 150 PSI Sizes 14"-Up, Wafer Type/Gear, Iron Body, Alum
Bronze Disc, Buna-N Seat, 416 Stainless Steel Stem, MSS-SP-67, ISO 5211 Mounting Cartridge Seat
$130.68
In Stock
Questions And Answers for DW80J9945US
We're sorry, but our Q&A experts are temporarily unavailable.
Please check back later if you still haven't found the answer you need.
Common Symptoms of the DW80J9945US
[Viewing 3 of 3]Leaking
Fixed by
these parts
these parts
Show All
Not cleaning dishes properly
Fixed by
these parts
these parts
Show All
Not draining
Fixed by
these parts
these parts
Show All
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
I replaced the pump assembly with a new drain hose
This is not a repair for the faint of heart. You will have to pretty much disassemble the entire dishwasher to replace the main pump assembly. And it’s not cheap, between the pump assembly and the hose...it was over $300...
This dishwasher is Junk...been through 2 motherboards, plastic internal spray arms...and finally a pump a ... Read more ssembly...if you own one and the pump begins to leak....shorts the pump motor out....if it gets this far...but a new dishwasher.
As far as partselect...they are 1st rate.
This dishwasher is Junk...been through 2 motherboards, plastic internal spray arms...and finally a pump a ... Read more ssembly...if you own one and the pump begins to leak....shorts the pump motor out....if it gets this far...but a new dishwasher.
As far as partselect...they are 1st rate.
Read less
Parts Used:
-
Mark from kennewick, WA
-
Difficulty Level:Difficult
-
Total Repair Time:More than 2 hours
-
Tools:Pliers, Screw drivers
18 of 51 people
found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
My front panel on my dishwasher was dented.
Extremely easy! Unscrewed 6 screws and simply put the panelin place and screwed back into place! Perfect fit!
We just finished a kitchen remodel and that was the only eyesore. Thank you Part Select!
We just finished a kitchen remodel and that was the only eyesore. Thank you Part Select!
Parts Used:
-
Cheryl from PASCOAG, RI
-
Difficulty Level:Really Easy
-
Total Repair Time:15 - 30 mins
-
Tools:Socket set
1 person
found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
No water
1) Unplugged unit
2) isolate water supply
3) slide unit out
4) disconnect water hose from dishwasher
5) carefully lay dishwasher on iaccess door.
6) unscrew and open access panel at the bottom
7) unscrew (2) screws attaching supply valve to the dishwasher
8) disconnect water supply hose from supply va ... Read more lve to using pliers
8) carefully remove valve, connect new valve.
Install supply hose from valve to unit.
Reverse instructions.
2) isolate water supply
3) slide unit out
4) disconnect water hose from dishwasher
5) carefully lay dishwasher on iaccess door.
6) unscrew and open access panel at the bottom
7) unscrew (2) screws attaching supply valve to the dishwasher
8) disconnect water supply hose from supply va ... Read more lve to using pliers
8) carefully remove valve, connect new valve.
Install supply hose from valve to unit.
Reverse instructions.
Read less
Parts Used:
-
James from Big Spring, TX
-
Difficulty Level:Really Easy
-
Total Repair Time:30 - 60 mins
-
Tools:Pliers, Screw drivers
1 of 2 people
found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!