DW703-BR (Type 3) DeWALT Miter Saw - Overview

This M8 × 1.25 elastic stop nut (lock nut) is an OEM replacement fastener used on power tools to securely hold critical components in place while resisting loosening from vibration. Designed with an integrated nylon insert, it provides reliable locking force without the need for additional hardware and is ideal for replacing worn or missing nuts during maintenance or repair to ensure safe, stable operation.

This replacement screw is a genuine OEM sourced hardware that is specially designed for with Delta, Dewalt and Black and Decker power tools. This screw is a standard hardware which has multiple uses based on equipment, to ensure correct application of this item please make sure to check appropriate diagrams of your unit. One durable torx screw is included per order.

This replacement screw is an authentic manufacturer sourced item. It is commonly used with a variety of power tools. This screw is a standard hardware which has multiple uses based on equipment. To ensure correct location and application of this item please make sure to check appropriate diagrams. It is made out of metal and it is sold in...Read moredividually. Requires a torx or a flat-head screwdriver to tighten/loosen this screw.

This Kerf plate is a genuine DeWalt replacement part. It is made of plastic with a slot in the middle for the saw blade to slide through. It has 3 screw holes on each side (6 in total) to firmly secure the kerf plate to your saw. rnrnKerf plates (also called kerf boards) are used to prevent excessive splintering, resulting in cleaner c...Read moreuts. Using the wrong kerf plate for your tool can give a rough edge to the material you’re cutting.

Genuine Dewalt replacement part, this item is sold individually. The purpose of the 394589-01 Screw is used to secure the pivot plate on the Miter Saws listed below. You can use a flat blade screwdriver or a Torx T-30 bit on this screw.

Genuine Dewalt replacement part This brush is sold individually, 2 are needed for the tools shown below It is always best to replace both brushes, even if only one is worn. Worn brushes frequently are the cause behind a motor running poorly. Replacing brushes can fix a motor that's operating intermittently. New brushes can restore a ...Read moremotor's electric braking. Carbon brushes are one of the most commonly replaced power tool parts. This is because carbon brushes are wear items, meaning that through friction and use they will gradually wear away until they need replacing. Worn brushes are a common causes of intermittent motor function, reduced electric braking and reduced motor power. A worn-out brush will often be worn down near to the wire lead and can be cracked, pitted, or burned. When replacing carbon brushes, be sure to inspect your armature for burns, cracks, or other damage which can indicate larger motor problems.

This is an original manufacturer sourced replacement part designed for use with Dewalt compound miter saws. It allows you to lift and lower the saw. This item is made out of plastic and it is sold individually. Includes both sides of the handle. Please note the screws used to attach it and the carrying handle are sold separately. You wou...Read moreld need a screwdriver for this repair • First you would remove the screws from carrying handle and remove it • Then, remove the screws in the top handle half and remove it • Remove the switch from the bottom half of the handle • Remove the cord clamp that is held in by two (2) screws. • Remove the bottom handle half from the saw by removing the screws holding it to housing • Attach the new handle following the previous steps in reverse

This is an Original Manufacturer Approved replacement part used on some Compound Miter Saws. This part is made out of Metal and it is Sold Individually. The purpose of this Clamp is to help securing a Blade to the unit.

This is an authentic replacement part that is sourced from the original manufacturer for use with hedge trimmers. The special screw is commonly used to secure the front guard assembly. This screw is sold as an individual replacement part, please note four screws may be required.

This is a genuine OEM sourced replacement part designed for use with a variety of power tools. This is a standard hardware which has multiple applications based on your tool. For proper use please refer to diagrams. This is a metal torx T20 metal screw which is sold individually.

This is an authentic item that is supplied directly from the original equipment manufacturer for Craftsman Plate Joiners. The Dust bag collects the dust created when operating the saw. The dust bag is made out of fabric and is sold individually. The adapter is sold separately. No tools need to install this part.