DW059K2-AR (Type 1) DeWALT Wrench - Parts

This is an authentic replacement part that is sourced from the original manufacturer for use with hedge trimmers. The special screw is commonly used to secure the front guard assembly. This screw is sold as an individual replacement part, please note four screws may be required.

Genuine OEM Dewalt replacement Carbon Brush and Holder Assembly. This brush comes complete with carbon brush, spring, and holder. Most brush replacement jobs will require the purchase of two of these brush assemblies. Carbon motor brushes are one of the most commonly replaced power tool components. Because carbon brushes are wear items...Read more, meaning that through friction and use they will gradually wear away, they will eventually require replacement. Worn brushes are common causes of intermittent motor function, reduced electric braking, and reduced motor power. A worn out brush will often be worn down near the wire lead and may be cracked, pitted, or burned. When replacing carbon brushes, be sure to also inspect your armature for burns, cracks, or other damage which indicates a larger motor problem.

This is a genuine Dewalt replacement part, it is sold individually. The purpose of the Detent Pin is to secure sockets to the anvil on the Impact Wrench model numbers shown below. It is held in the anvil by use of a spring and pin.

Genuine OEM replacement part, this item is sold individually. This spring is used in various locations of the tools listed below. Over time springs will loose their tension and will need to be replaced. The dimensions on this spring are 5/16 in length and 3/16 in diameter.

This is an original Craftsman replacement part sourced directly from the manufacturer. The roll pin is found in impact wrenches and multi-purpose saws from Craftsman. This metal part is used as a fastener to hold components together, and may be found in different parts of the machine depending on model. Please refer to the parts diagra...Read morem to be sure of ordering the correct part. You may require a punch set when replacing this item. This part is sold individually.

Battery cap

This is an authentic DeWalt replacement part that has been sourced from the original manufacturer to be used with circular saws, impact wrenches, and reciprocating saws. The plastic bearing support fits into the motor housing and is used to support the armatures rear bearing to allow the armature rotate while being secured within the housing. This item is available as an individual replacement part.

This is a genuine replacement part sourced directly from the manufacturer. The ball is commonly found in impact wrenches from DeWALT and Black & Decker. This part is made of metal, and is placed in the carrier to interact with the impactor. You may require a screwdriver when replacing this item. It is advisable when removing multiple ...Read moreparts to keep careful track of their order so they can be reassembled correctly. The ball is sold as an individual replacement part.

This is an OEM part sourced directly from the manufacturer. This 17.64 oz container of grease is used to lubricate the system of DeWalt equipment in order to protect the inner working parts and extend the life of the tool. One container is included per order.

This replacement screw is an authentic OEM sourced item specially designed for use with Dewalt and Black and Decker equipment. This is screw is used in a lot of different applications depending on the tool. Please make sure to check appropriate diagrams for correct use and location of this hardware. Keep in mind, this pan head screw is so...Read moreld individually. You will need a torx screwdriver to install or remove this hardware.

This replacement screw is a high-quality component which is supplied by the original equipment manufacturer for use with Black and Decker, Porter Cable and DeWalt power tools. It is a standard hardware which has multiple applications depending on the model of your equipment, please make sure to check appropriate diagrams of your model for...Read more the correct location and use of this item. This high-quality metal screw is sold individually.

It is an authentic OEM sourced replacement part that is supplied for use with DeWALT cordless drills. This is one of the special screws for the gear case assembly, please make sure to check appropriate diagrams for the correct application of this hardware. It is a high-quality screw which is made of durable metal and it is sold individually.