DV45R6100W (A3-00) Samsung Dryer - Overview
Sections of the DV45R6100W
[Viewing 1 of 1]Keep searches simple, eg. "belt" or "pump".
Drive Belt
PartSelect #: PS4133825
Manufacturer #: 6602-001655
The drum belt attaches to the motor pulley and causes the drum to spin as the motor is rotating. The drum belt is made of black rubber. This is an easy repair and should only take a few minutes. This ...
$53.32
On Order
Heating Element - 5300W
PartSelect #: PS4205218
Manufacturer #: DC47-00019A
This dryer heating element produces heat to dry clothes in a dryer and is located in the rear end. If the heater element is burned, dryer does not heat or over heats, or clothes take too long to dry, ...
$79.80
On Order
Idler Pulley Assembly
PartSelect #: PS11771601
Manufacturer #: DC93-00634A
This idler pulley assembly is sourced from the original manufacturer for use in dryers. The assembly includes the pulley wheel and bracket. It is found near the motor where it provides tension to the ...
$59.47
In Stock
Thermal Fuse
PartSelect #: PS4205213
Manufacturer #: DC47-00016A
This thermostat is a genuine OEM part and is manufacturer-approved for electric dryers. The thermostat is responsible for monitoring and maintaining the temperature inside the dryer during the drying ...
$27.36
In Stock
Heater Duct Assembly w/ Thermostats
PartSelect #: PS4220205
Manufacturer #: DC97-14486A
This genuine OEM heater duct assembly in your dryer directs hot air into the drum during operation. Generally, it can be found behind the drum or at the rear of the dryer. If this assembly becomes dam...
$242.44
In Stock
Dryer Assembly Bracket Thermostat
PartSelect #: PS4276292
Manufacturer #: DC96-00887C
This thermal cut-off fuse bracket assembly is a genuine replacement part supplied directly by Samsung for use in dryers. It is a safety component that is designed to protect the dryer from overheating...
$63.64
In Stock
Dryer Leveling Leg
PartSelect #: PS4206963
Manufacturer #: DC61-03128A
Leveling leg supports the dryer. Adjust the height of the leveling leg to make the dryer level.
$31.58
In Stock
Filter Cover
PartSelect #: PS4210250
Manufacturer #: DC63-01140A
The Samsung Dryer Filter Cover offers a superior solution for maintaining the efficiency of your dryer. Uniquely designed, this high-quality cover fits with precision on your Samsung dryer to guard th...
$34.74
In Stock
Hinge Guide
PartSelect #: PS4206023
Manufacturer #: DC61-00891A
This door hinge guide (part number DC61-00891A) is for dryers. Door hinge guide DC61-00891A holds and supports the door hinge on the front panel. Unplug the dryer before installing this part. Wear wor...
$55.29
On Order
Questions And Answers for DV45R6100W
Be the first to ask our experts a question about this model!
✖
Ask a Question
Ask our experts a question on this model and we'll respond as soon as we can.
Sorry, we couldn't find a match for "".
Here's a guide for finding your model number.
Something went wrong. Please try again later.
Your Question Has Been Submitted!
Our experts will send you an email as soon as your question has been answered.
Common Symptoms of the DV45R6100W
[Viewing 4 of 4]Not Heating
Fixed by
these parts
these parts
Show All
Noisy
Fixed by
these parts
these parts
Show All
Drum Not Spinning
Fixed by
these parts
these parts
Show All
Won’t Start
Fixed by
these parts
these parts
Show All
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
The dryer turned on but the drum did not move when you pressed start even though It started it cycles.
I YouTube it and there’s a step by step process on how to do it, took maybe 30 mins. If I can so can you
Parts Used:
-
Christopher from SUGARLOAF, CA
-
Difficulty Level:Really Easy
-
Total Repair Time:15 - 30 mins
-
Tools:Screw drivers
39 of 72 people
found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Timed dryer cycle was stuck on 1 minute, dryer wouldn't stop running unless door was opened.
Issue was the heating element coil, which had broken in places and shorted itself out. I removed the top and front panels to expose the heating element's housing. Then unplugged, removed and disassembled the housing to expose the heating element (there are many videos online that explain the process). Once the heating element was replaced
... Read more
, the problem disappeared. Now the clothes are drying much faster than before. It is definitely worth getting the Samsung OEM part. Many reviews on generic equivalents were negative, despite how attractive the low price may look at first. PartSelect has never failed to impress with quick shipping and quality products.
Read less
Parts Used:
-
Joseph from REHOBOTH, MA
-
Difficulty Level:A Bit Difficult
-
Total Repair Time:1- 2 hours
-
Tools:Pliers, Screw drivers
9 of 11 people
found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
no heat during cycle
Son in law followed youtube video and installed both parts.
Do you really want to know how it went? It quit heating in the first five minutes
My new dryer was just installed this evening.
Case closed
Do you really want to know how it went? It quit heating in the first five minutes
My new dryer was just installed this evening.
Case closed
Parts Used:
-
Diana from LYLE, WA
-
Difficulty Level:Difficult
-
Total Repair Time:1- 2 hours
-
Tools:Screw drivers
8 of 11 people
found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!