EasyApplianceParts is now PartSelect! We've merged our sites to provide a better shopping experience for you.   Full Details

Find Parts

Parts Departments

Top Model Types

Top Brands

Repair Help

Expert Repair Videos

Keep typing for more specific results...

DU24J2CA Maytag Dishwasher - Overview

Diagrams for DU24J2CA

See every part. Know exactly what you need.

Enter a part description. DIY Heroes keep it simple, eg. "belt" or "pump".

Search filter:
Clear Filter
Your search term must have 3 or more characters.
Dryer Screw – Part Number: WP90767
$7.47
In Stock
Dryer Screw
★★★★★
★★★★★
(2)
Part #WP90767
This screw is sold individually.
Hose Clamp – Part Number: WP285655
$9.62
In Stock
Hose Clamp
★★★★★
★★★★★
(2)
Part #WP285655
The hose clamp is used to hold the water hose in place which will prevent the hose from leaking water. Sometimes the clamp may lose its ability to latch on, causing a leaking washer. For the installation, you will need a flat head screw driver to replace the clamp and a drill to access the screws to remove the front of the washer. Be careful if you do not have specific clamp pliers as the clamp could fly off. Once the front of the washer has been removed, take a quick look for water damage or any obvious signs of where the leak is coming from. If it is not obvious, run water to test.
Heat Resistant Adhesive – Part Number: W10841140
$18.22
In Stock
Heat Resistant Adhesive
★★★★★
★★★★★
(1)
Part #W10841140
This is a heat-resistant adhesive for your appliance. The heat resistance allows you to stick parts such as grate feet, gaskets, and felt seals in hot areas, such as a cooktop, without compromising the integrity of the adhesive. It is white in color, and the tube is approximately 7.5 inches long.
Range Frame Screw – Part Number: WP7101P126-60
$7.47
Special Order
Range Frame Screw
★★★★★
★★★★★
(1)
Part #WP7101P126-60
Sold Individually.
Screw – Part Number: WP355214
$7.47
In Stock
Screw
Part #WP355214
Dishwasher O-Ring – Part Number: WP912510
No Longer Available
Dishwasher O-Ring
Part #WP912510
Refrigerator Screw – Part Number: WP488234
$8.55
Special Order
Refrigerator Screw
Part #WP488234
This screw is sold individually. Size: 8-32 x 1/4 inch.
Screw – Part Number: WP67006908
$7.47
Special Order
Screw
Part #WP67006908
Model Number GB2526REKS : SCR
Nut – Part Number: M0282009
$21.45
Special Order
Nut
Part #M0282009
This part is sold individually. This nut can be found in various appliances including a dishwasher, air conditioner, washer, dryer, range/cooktop, oven, freezer, range hood, and refrigerator. There is a serrated pattern along the edge of the nut, which helps to avoid loosening while the appliance is in motion. Nuts may corrode or rust over time and will need to be replaced. You will need a wrench to screw the nut into place. This genuine OEM part comes directly from the manufacturer.
Door Gasket Kit – Part Number: 5300809035
No Longer Available
Door Gasket Kit
Part #5300809035
This dishwasher door gasket seals between the tub and the door to prevent water from leaking. This kit includes the clips and connector bar.
Screw – Part Number: WP22001496
$7.47
Special Order
Screw
Part #WP22001496
SPRAY ARM BOLT – Part Number: 809018
No Longer Available
SPRAY ARM BOLT
Part #809018

Common Symptoms of the DU24J2CA

How this model fails, and the parts that fix it.

Watch our pros, then fix it yourself.

See how others fixed this model. Time, tools, difficulty, and steps that lead to victory! View More

Search repair tips from other customers using simple keywords like "replace", "fit", "remove", "inspect". DIY doesn't mean you have to do it alone!

Search filter:
Clear Filter
Your search term must have 3 or more characters.
Water Leak On Right Side At Door And Gasket
4 of 4 people found this instruction helpful.
  • CLAUDE from VALDEZ, AK
  • Really Easy
  • 30 - 60 mins
  • Screw drivers
Ordered gasket 13 may, received in mail 27 may. Enlarged instructions for easy reading. Removed sliding drawers from inside dishwasher removed door panel and panel at bottom of door to expose nut holding bottom clip removed philips head screw holding bottom clip and used flat blade screw drive to pull gasket fasteners (clips) holding o ld gasket in place. Removed old gasket. Installed new fasteners on new gasket, did not need to use plyers to install clips installed gasket junction wire at bottom of gasket and formed gasket to fit dishwasher, installed new gasket on fasteners in dishwasher used handle end of screwdriver to push clips in place, reinstalled new bottom wire clip and used 1/4 in ratchet with socket to secure nut on end of screw holding bottom clip in place. Put slideing drawers back in dishwasher door closed and latched ok so I washed a small load of dishes to check for water leak. No water leak reinstalled door panel and bottom panel on dishwasher.
Was this helpful?
Thank you for voting!
Dishwasher leaked water at the bottom of the door
1 of 2 people found this instruction helpful.
  • William from Columbia City, IN
  • Easy
  • 15 - 30 mins
  • Screw drivers
I removed all of the clips, that held the rubber seal inside the basket. I then replaced the new rubber seal with new clips. Very easy. The instructions were very helpful.
Was this helpful?
Thank you for voting!
door of oven came apart when plastic screw holders broke
1 of 2 people found this instruction helpful.
  • patricia from chipely, FL
  • Really Easy
  • 15 - 30 mins
  • Screw drivers
put back together with parts ordered. Parts arrived in 2 days!!!! and saved my large dinner party the following day from being ruined. Thank you so much for your parts inventory and for Jenn Air supplying only the part needed and not the entire door. It was a life saver!
Was this helpful?
Thank you for voting!