DMO24W Dacor Microwave - Overview
Sections of the DMO24W
[Viewing 1 of 1]
Keep searches simple, eg. "belt" or "pump".
SVC-TURN TABLE TRAY;66344,DMO2
PartSelect #: PS17645651
Manufacturer #: DE81-08798A
$94.71
Special Order
SVC-OPEN LEVER;86824,PMOR3021B
PartSelect #: PS17645012
Manufacturer #: DE81-10108A
This is an open lever for a microwave. It allows the microwave door to open when prompted. When you push on your door latch lever, it contacts the door latch assembly and releases the hooks that lock ...
$31.85
Special Order
SVC-WAVE GUIDE COVER;86828,DMO
PartSelect #: PS17645650
Manufacturer #: DE81-08395A
$20.37
Special Order
Belt Drive Motor Kit with Capacitor
PartSelect #: PS334458
Manufacturer #: 285222
This two-speed motor performs 1725 revolutions per minute in one speed, and 1140 revolutions per minute in the other speed. It runs at 1/2 horsepower and carries 115 volts.
No Longer Available
SVC-MONITOR FUSE SWITCH;66179,
PartSelect #: PS17644982
Manufacturer #: DE81-06811A
$15.81
Special Order
SVC-BUTTON SPRING;76170,PMOR30
PartSelect #: PS17645002
Manufacturer #: DE81-09398A
No Longer Available
SVC-OPEN BUTTON BLK;66337B,DMO
PartSelect #: PS17644995
Manufacturer #: DE81-08384A
$9.95
Special Order
SVC-MAGNETRON;86807,DMO24B
PartSelect #: PS17645016
Manufacturer #: DE81-10245A
$110.11
Special Order
SVC-HIGH VOLTAGE CAPACITOR;869
PartSelect #: PS17645627
Manufacturer #: DE81-04854A
$117.51
Special Order
SVC-CAVITY TEMP FUSE;86795,DMO
PartSelect #: PS17644991
Manufacturer #: DE81-08360A
$25.95
Special Order
Common Symptoms of the DMO24W
[Viewing 1 of 1]
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
It was the heat safety switch in the old drive motor
It was fairly easy a few tight spaces to reach in but all in all it was pretty straight forward
Parts Used:
-
Andrew from HATTIESBURG, MS
-
Difficulty Level:Easy
-
Total Repair Time:15 - 30 mins
-
Tools:Nutdriver, Pliers, Screw drivers, Socket set, Wrench (Adjustable), Wrench set
2 of 3 people
found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Washer Had A Continuous Moan And Vibration
I disconnected the drive belt from the motor and ran the motor to isolate it from the rest of the mechanisms. This was the noise. I disconnected the water lines and electrical cord,laid the machine front down. I disconnected the motor plug,removed the two bracket to body bolts and lifted the motor out to the bench. I then transferred th
... Read more
e bracket to the new motor and reversed the procedure to install the motor. The most difficult part was raising the machine back up alone,I suggest a helper.
Read less
Parts Used:
-
Roger from Millis, MA
-
Difficulty Level:Really Easy
-
Total Repair Time:30 - 60 mins
-
Tools:Nutdriver, Wrench set
Was this instruction helpful to you?
Thank you for voting!