DMO24S Dacor Microwave - Overview

Diagrams for DMO24S

See every part. Know exactly what you need.

Parts for the DMO24S

$31.85

SVC-OPEN LEVER;86824,PMOR3021B

Part #DE81-10108A

This is an open lever for a microwave. It allows the microwave door to open when prompted. When you push on your door latch lever, it contacts the door latch assembly and releases the hooks that lock the door shut, allowing the door to open. If your door will not open, you may need to replace the open lever. You will need to remove the mi...Read more

Read less

$20.37

SVC-WAVE GUIDE COVER;86828,DMO

Part #DE81-08395A

Belt Drive Motor Kit with Capacitor

Part #285222

This two-speed motor performs 1725 revolutions per minute in one speed, and 1140 revolutions per minute in the other speed. It runs at 1/2 horsepower and carries 115 volts.

$6.55

SVC-LATCH SPRING;86786,PMOR30B

Part #DE81-09672A

$10.95

SVC-LATCH HEAD;86785,PMOR3021B

Part #DE81-10099A

DISCONTINUED

Part #86815

$110.11

SVC-MAGNETRON;86807,DMO24B

Part #DE81-10245A

$117.51

SVC-HIGH VOLTAGE CAPACITOR;869

Part #DE81-04854A

SOLENOLD

Part #89346

$25.95

SVC-CAVITY TEMP FUSE;86795,DMO

Part #DE81-08360A

$91.06

SVC-FAN MOTOR;86805,DMO24B

Part #DE81-10231A

SVC-TURNTABLE TRAY

Part #DE81-09153A

Common Symptoms of the DMO24S

How this model fails, and the parts that fix it.

Door stuck closed

Fixed by
these parts

Show All

Repair Tips From Fixers Like You

See how others fixed this model. Time, tools, difficulty, and steps that lead to victory! View More

It was the heat safety switch in the old drive motor

2 of 3 people found this instruction helpful.

Andrew from HATTIESBURG, MS
Easy
15 - 30 mins
Nutdriver, Pliers, Screw drivers, Socket set, Wrench (Adjustable), Wrench set

It was fairly easy a few tight spaces to reach in but all in all it was pretty straight forward

Was this helpful?

Washer Had A Continuous Moan And Vibration

Roger from Millis, MA
Really Easy
30 - 60 mins
Nutdriver, Wrench set

I disconnected the drive belt from the motor and ran the motor to isolate it from the rest of the mechanisms. This was the noise. I disconnected the water lines and electrical cord,laid the machine front down. I disconnected the motor plug,removed the two bracket to body bolts and lifted the motor out to the bench. I then transferred th ... Read more

Read less

Was this helpful?