Models > DM15HW14T

DM15HW14T Magic Chef Microwave - Overview

Sections of the DM15HW14T

[Viewing 8 of 8]
Keep searches simple, eg. "belt" or "pump".
Screw, 8/18 x 3/8 – Part Number: WP90767
Screw, 8/18 x 3/8
★★★★★
★★★★★
(2)
PartSelect #: PS11746840
Manufacturer #: WP90767
This screw is sold individually.
$5.42
  In Stock
Screw – Part Number: W11233072
Screw
★★★★★
★★★★★
(6)
PartSelect #: PS12349731
Manufacturer #: W11233072
This is a multi-use and multi-appliance screw. It can be used on a microwave, refrigerator, range/oven, air conditioner, dehumidifier, washer, or dryer. The measurements of this screw are 8 x 1/2 inch...
$20.79
  In Stock
Light Bulb - 120v 25w – Part Number: WPA3167501
Light Bulb - 120v 25w
★★★★★
★★★★★
(3)
PartSelect #: PS11747808
Manufacturer #: WPA3167501
This is a 120 volt, 25-watt light bulb that fits a variety of medium to large kitchen appliances. It functions by illuminating when the appliance door is open. It has a small base with a twist lock. T...
$53.91
  In Stock
Screw – Part Number: WPW10253196
Screw
PartSelect #: PS11751203
Manufacturer #: WPW10253196
Sold individually. This screw is half of an inch long. It is made of metal and it is intended for use with some Maytag brand ranges.
$4.68
  Special Order
Capacitor – Part Number: WP59001168
Capacitor
★★★★★
★★★★★
(1)
PartSelect #: PS11743000
Manufacturer #: WP59001168
The high-voltage capacitor is an electronic device that holds a charge of electricity in the high-voltage circuit of the microwave. The capacitor stores electricity similar to how a battery does, but ...
$122.64
  In Stock
SUPPORT, ROLLER – Part Number: Y02100186
SUPPORT, ROLLER
PartSelect #: PS2191263
Manufacturer #: Y02100186
This turntable roller support is less than an inch long. It is made of plastic and is used for some microwaves.
  No Longer Available
Fuse - 15 Amp 250V – Part Number: WPY01050009
Fuse - 15 Amp 250V
★★★★★
★★★★★
(1)
PartSelect #: PS11757434
Manufacturer #: WPY01050009
$16.76
  Special Order
Turntable Roller – Part Number: 02210011
Turntable Roller
PartSelect #: PS14460
Manufacturer #: 02210011
This turntable roller is less than an inch long. It is made of plastic and is used for some microwaves.
  No Longer Available
PIN, PIVOT – Part Number: Y03070041
PIN, PIVOT
PartSelect #: PS2192607
Manufacturer #: Y03070041
This pivot pin is just under an inch long. It is made of plastic and is used for many ranges and microwaves.
  No Longer Available
DISCONTINUED – Part Number: Y03110070
DISCONTINUED
PartSelect #: PS2193428
Manufacturer #: Y03110070
  No Longer Available
TAPE- FOAM – Part Number: 74002138
TAPE- FOAM
PartSelect #: PS2080761
Manufacturer #: 74002138
  No Longer Available
NUT, SCREW – Part Number: 25-6124
NUT, SCREW
PartSelect #: PS69506
Manufacturer #: 25-6124
  No Longer Available

Questions And Answers for DM15HW14T

We're sorry, but our Q&A experts are temporarily unavailable.
Please check back later if you still haven't found the answer you need.

Common Symptoms of the DM15HW14T

[Viewing 2 of 2]
No heat
Fixed by
these parts
Fixing
Show All
Won’t turn on
Fixed by
these parts
Fixing
Show All
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Blown Fuse - Ps1750182
Unscrewed the cover of the microwave replaced the blown fuse with the new fuse, plugged in the microwave and tested all functions and everything worked fine. Thx for quick delivery.
Parts Used:
Fuse - 15 Amp 250V
  • John from Inverness, FL
  • Difficulty Level:
    Really Easy
  • Total Repair Time:
    Less than 15 mins
  • Tools:
    Screw drivers
10 of 12 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
no power at all
unscrew microwave's cover,test the fuse which is located at top rear left side, the fuse is inside a plastic tube,if the fuse is burnout,just replace it.
Parts Used:
Fuse - 15 Amp 250V
  • patricio from chicago, IL
  • Difficulty Level:
    Easy
  • Total Repair Time:
    Less than 15 mins
  • Tools:
    Nutdriver, Screw drivers
7 of 14 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Light Bulb
Using a flat-head screw driver, I removed the 1 screw from the small "door" on the back, upper right corner. Once the screw was removed, it allowed the door plate to "pop" open; exposing the old bulb. I removed the old bulb; replaced it with the new one. DONE!
Parts Used:
Light Bulb - 120v 25w
  • Terri from Kingsland, TX
  • Difficulty Level:
    Easy
  • Total Repair Time:
    Less than 15 mins
  • Tools:
    Screw drivers
6 of 12 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!