Models
>
DLB2580PK
DLB2580PK Hotpoint Dryer - Overview
Sections of the DLB2580PK
[Viewing 1 of 1]Keep searches simple, eg. "belt" or "pump".
Heater 2-Coil Restring Kit - 240V
PartSelect #: PS265621
Manufacturer #: WE11X260
This restring coil kit is used to replace the existing coil in a dryer's heating element.
No Longer Available
High Limit Thermostat
PartSelect #: PS268083
Manufacturer #: WE4X584
With this high limit/safety thermostat, a dryer's heating element will cut out if the internal temperature reaches 260 degrees Fahrenheit. This element is meant as a safety device, will kick back in w...
$32.09
In Stock
Drive Motor
PartSelect #: PS1559768
Manufacturer #: WE17X10010
Replaces "T" and "V" style motors. Includes two motor pulleys. If you have an older model dryer, the pulley may be pressed on or held on with a set screw. If pulley is pressed on, a new motor pulley must be ordered.
$348.87
In Stock
Door Switch
PartSelect #: PS268004
Manufacturer #: WE4X197
This part has three terminals. Note: Use the two smaller terminals for models that only have two wires to the switch.
No Longer Available
Multi Rib Belt - 4 Ridges
PartSelect #: PS265703
Manufacturer #: WE12X49P
This dryer drum belt goes around the dryer drum and the pulleys to rotate the drum once motor is activate.
No Longer Available
Heater Coil Restring Kit - carries 250 volts
PartSelect #: PS265622
Manufacturer #: WE11X261
This heating element coil restring kit is intended for use with many of GE's brands of electric clothes dryers. It carries 250 volts, and includes two coils.
No Longer Available
Thermostat (Limit: 140-15)
PartSelect #: PS268084
Manufacturer #: WE4X587
Use this cycling thermostat with your GE brand clothes dryer. It has a limit of 140 degrees Fahrenheit and a differential of 15 degrees. This means that with this thermostat, your dryer's heating elem...
No Longer Available
Questions And Answers for DLB2580PK
We're sorry, but our Q&A experts are temporarily unavailable.
Please check back later if you still haven't found the answer you need.
Common Symptoms of the DLB2580PK
[Viewing 2 of 2]Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
dryer would run but no heat
first had to troubleshoot... used multimeter to check all switches, they were good.
then checked thermostats, good again.
then checked motor centrifugal switch.. good.
with multimeter i found continuity between heating coil leads and heater housing. coil had broken and welded itself to housing.
... Read more changed coil in short time with restring kit (which got here amazingly fast) and everything is great.
ps: PartsSelect got me the part super fast and it was what i needed. also at a great price. would order from them again.
added note: if i were to do this again i would order the porcelain insulators that insulate the leads to the coils, they were old and very fragile and i experienced some fragmentation.
thanks to PartsSelect
then checked thermostats, good again.
then checked motor centrifugal switch.. good.
with multimeter i found continuity between heating coil leads and heater housing. coil had broken and welded itself to housing.
... Read more changed coil in short time with restring kit (which got here amazingly fast) and everything is great.
ps: PartsSelect got me the part super fast and it was what i needed. also at a great price. would order from them again.
added note: if i were to do this again i would order the porcelain insulators that insulate the leads to the coils, they were old and very fragile and i experienced some fragmentation.
thanks to PartsSelect
Read less
Parts Used:
-
Todd from Clarksburg, OH
-
Difficulty Level:A Bit Difficult
-
Total Repair Time:More than 2 hours
-
Tools:Nutdriver, Pliers, Screw drivers, Socket set, Wrench (Adjustable), Wrench set
47 of 59 people
found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
replqce bad switch
pried old switch assembly from front of machine with screw driver. removed 2 electrical connections. shorted terminals to verify problem. inserted wiring terminals to new switch. verified operation and then pushed switch assembly into machine opening.
Parts Used:
-
Robert from Virginia Beach, VA
-
Difficulty Level:Really Easy
-
Total Repair Time:Less than 15 mins
-
Tools:Screw drivers
30 of 33 people
found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Dryer had no heat
Open the door. Remove torx screws just above the door. This allows the top to fold up toward the back.
Remove 2 screws with nutdriver just inside the top on each side. Then loosen 2 screws with nutdriver at the front near the bottom. The front can be lifted up and swung around to the right to get it out of the way. Optional: Di ... Read more sconnect the wires to get it completely out of the way.
From the back of the dryer bend the spring-loaded bar that holds a pulley to the belt just enough to release the belt.
From the front pull out the drum forward and out of the dryer. The belt will come with it.
Now you can see the inner and outer heater coil elements. Both of mine were clearly broken. At this point follow the directions in the replacement kit.
Reinstall in reverse order.
Remove 2 screws with nutdriver just inside the top on each side. Then loosen 2 screws with nutdriver at the front near the bottom. The front can be lifted up and swung around to the right to get it out of the way. Optional: Di ... Read more sconnect the wires to get it completely out of the way.
From the back of the dryer bend the spring-loaded bar that holds a pulley to the belt just enough to release the belt.
From the front pull out the drum forward and out of the dryer. The belt will come with it.
Now you can see the inner and outer heater coil elements. Both of mine were clearly broken. At this point follow the directions in the replacement kit.
Reinstall in reverse order.
Read less
Parts Used:
-
Anne from Newton, MA
-
Difficulty Level:A Bit Difficult
-
Total Repair Time:More than 2 hours
-
Tools:Nutdriver, Screw drivers, Socket set, Wrench (Adjustable)
18 of 23 people
found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!