DHS716T2 (Type 20) DeWALT Miter Saw - Overview

This battery cap is designed to protect the terminal contacts on high-capacity cordless tool batteries during storage and transport. Made from durable plastic, it helps prevent debris intrusion and reduces the risk of accidental short circuits when the battery is not in use. Ideal for replacing a lost or damaged cap, it supports safe handling and helps maintain battery condition between uses.

This is a genuine Dewalt replacement part, it is sold individually. The purpose of the Blade Adapter, is to make the bore of a blade that is 1 inch and reduce to a 5/8 inch bore. Making it possible to use a 1 inch bore blade on a 5/8 inch arbor.

This replacement screw is an authentic manufacturer sourced item. It is commonly used with a variety of power tools. This screw is a standard hardware which has multiple uses based on equipment. To ensure correct location and application of this item please make sure to check appropriate diagrams. It is made out of metal and it is sold in...Read moredividually. Requires a torx or a flat-head screwdriver to tighten/loosen this screw.

This replacement screw is a high quality hardware commonly utilized on Bostitch, Black and Decker, Porter Cable and Dewalt equipment. This is a authentic OEM item which has multiple applications depending on the unit, for correct location and use of this screw make sure to check appropriate diagrams. Please note this torx screw is sold individually.

This Kerf plate is a genuine DeWalt replacement part. It is made of plastic with a slot in the middle for the saw blade to slide through. It has 3 screw holes on each side (6 in total) to firmly secure the kerf plate to your saw. rnrnKerf plates (also called kerf boards) are used to prevent excessive splintering, resulting in cleaner c...Read moreuts. Using the wrong kerf plate for your tool can give a rough edge to the material you’re cutting.

Genuine Dewalt replacement part, this item is sold individually. The purpose of the 394589-01 Screw is used to secure the pivot plate on the Miter Saws listed below. You can use a flat blade screwdriver or a Torx T-30 bit on this screw.

This is a genuine manufacturer approved replacement part designed for use with Dewalt miter saws. This bushing helps to secure the blade to the shaft/spindle. It is made out of metal and it is sold individually. To replace it you would need a wrench to remove the blade bolt.

Included in part number 606883-00

This needle bearing is open on one side and closed on the other. This genuine DeWalt replacement part is sold individually. • Ball bearings minimize friction between rotating parts in your tool. The balls or rollers bear the load and spin, distributing the weight evenly, while the minimal contact area of the balls reduces friction. ...Read moreThis reduces wear on the tool, allowing it to run smoothly. • Bearings experience constant wear when the tool is in operation from pressure, heat, vibration and friction. Because of this, many Bearings need periodic maintenance or replacement.

This is an authentic OEM part. The DeWALT pivot plate is constructed of high-quality metal, and has been designed for use with many miter saw devices. This item fitted onto the lower guard assembly, and helps to rotate it. Although the pivot plate is available for individual sale, it is also found in the lower guard assembly (N407266). A screwdriver and a wrench is necessary in the removal and replacement.

This OEM Universal dust bag fits all of the DEWALT miter saws. It comes with the adapter which is not sold separately. Please note some DW718 Models may require an adapter part #618240-00 to make it work. The purpose of the dust bag is to capture sawdust to keep your shop and your work surface cleaner.