DHDSR46EE1WW General Electric Dryer Repair Parts - Manuals & Care Guides
Quick Question!

Have you ever purchased from PartSelect.com before?

Models > DHDSR46EE1WW

DHDSR46EE1WW General Electric Dryer - Overview

Get Parts and Repair Help for DHDSR46EE1WW

Manuals & Care Guides for DHDSR46EE1WW

Click to download
Search for parts
Keep searches simple, eg. "belt" or "pump". Need help?
PartSelect #:PS755842
Manufacturer #:WE1M504
This is a drum bearing slide, also known as bearing drum slide, glide, or pad, that is fitted to a dryer. This is a white plastic part that is sourced directly from the manufacture...
$6.78
In Stock
PartSelect #:PS6447706
Manufacturer #:WE1M1067
The drum slides support the front of the dryer drum. As they start to break down it may cause your dryer to make noise or not dry clothes in the usual amount of time. This item is ...
$4.71
In Stock
PartSelect #:PS960316
Manufacturer #:WE3M26
This front drum bearing helps your dryer operate as quietly as possible. This is an OEM part and is sold individually. It is about 10 inches in height and 22 inches in width. It is...
$24.49
In Stock
PartSelect #:PS9861764
Manufacturer #:WE09X20441
This is a duct felt seal for a dryer. The duct felt seal allows the front-load dryer drum to glide smoothly on the front panel. Your dryer will not function properly if the drum fe...
$6.24
In Stock
PartSelect #:PS1482197
Manufacturer #:WE1M654
This is a timer knob for your dryer. This knob is white with a silver trim, and is roughly 3 inches in diameter. You will need to replace this part is if your timer will not advanc...
$17.69
In Stock
PartSelect #:PS267091
Manufacturer #:WE1X980
This clip ensures that the knob is securely fastened to the control shaft, allowing you to properly select the correct time and setting for your dryer. If your dryer will not start...
$4.94
In Stock
PartSelect #:PS1766009
Manufacturer #:WE12M29
This is a dryer drum drive belt. It is 89.5 inches long with four ribs on the inside for a better grip. The drive belt on your dryer attaches to the motor pulley and then wraps aro...
$24.22
In Stock
PartSelect #:PS3487203
Manufacturer #:WE4M519
This replacement start switch is a genuine OEM part for your dryer. If your dryer will not start or shut off, you may need to replace this part. For this repair you will need a num...
$11.63
In Stock
PartSelect #:PS267529
Manufacturer #:WE25M40
This rear drum bearing kit includes a shaft, ground strap, bearing, seven screws, and installation instructions. The bearing plate comes with a slot in it for the ground strap. Thi...
$50.08
In Stock
PartSelect #:PS9494490
Manufacturer #:WE01X20419
This part is on the outer door of the dryer.
$11.82
In Stock
Search Instructions
Keep searches simple, eg. "belt" or "pump". Need help?

Due to over loading of the dryer the drum ruined the slides and was making a bad noise due to plastic rubbing plastic

  • Customer: Matthew from Plainfield, IL
  • Difficulty: Really Easy
  • Time to Complete: 15 - 30 mins
  • Tools Required: Screw drivers
  • 698 of 783 people found this instruction helpful
It was pretty easy. After already taking apart the dryer to install a new belt I knew exactly my plan of action. I removed the two screws that hold the top panel of the dryer to the front panel. I then removed the top panel and removed the screws that hold the front to each side panel. I than pulled the front away from the cabinet and drum. I put the ne... read more

Dryer was squeeling when running.

  • Customer: Daniel from Chicago, IL
  • Difficulty: Really Easy
  • Time to Complete: 15 - 30 mins
  • Tools Required: Screw drivers
  • 628 of 707 people found this instruction helpful
I removed the two screws at the front above the drum opening (with the dryer door open). The top panel then lifts off. I removed the screw at each side that holds the front panel to the side panels, tilted the front panel forward, which disengages the front of the drum from the front drum glide bearing. I then lifted the front panel slightly, unhooking th... read more

Intermittant squeaking noise

  • Customer: Mark from Addison, IL
  • Difficulty: Easy
  • Time to Complete: 15 - 30 mins
  • Tools Required: Screw drivers
  • 575 of 717 people found this instruction helpful
Basically, I followed the same steps a prior person posted.
1.Removed the two screws inside the door, on the top part of the opening.
2.Lifted up and removed the top.
3.Removed two screws holding the front panel in place.
4.Held up the drum while removing the front panel. I carefully turned the panel so I could get at the drum bearing wit... read more