DH3028 (Type 0) DeWALT Pressure Washer - Overview

This thermal relief valve is a genuine part produced by the original manufacturer for DeWALT pressure washers. The valve connects to the pump and protects it from overheating. If the pump gets too hot this valve will pop out to release extra pressure, and prevent excessive damage to the pump. It is an identical replacement for a damaged o...Read morer a missing component that was installed on a new unit. Note, one durable metal thermal relief valve is included. To replace it you will need an adjustable wrench. Make sure to release the pressure from the tank before starting the repair.

This genuine OEM part is made to fit the DeWALT machines listed below. This rubber foot attaches to the underside of the frame, dampening vibrations and keeping the machine stable while protecting surfaces beneath. One (1) foot and one (1) Torx screw are included.

This part is an OEM sourced directly from the manufacturer for use in DeWALT pressure washers. The coupler attaches to the pump assembly. It might require a wrench to replace this part if it becomes broken. Keep in mind this high-quality part is made of metal and is priced individually.

The lance attaches to the gun. This is an authentic DeWALT replacement part that is sourced from the original manufacturer for use with pressure washers. This part is made of metal and sold individually. When replacing this item no tools should be needed. It may become bent or broken and will need to be replaced.

This is a genuine DeWalt replacement part that has been sourced from the original manufacturer to be used with pressure washers. The clear plastic hose is used to carry detergent from the chemical tank to the pump assembly. This item is sold as an individual replacement part.

This replacement part is specially designed for use with pressure washers. It is supplied directly from original equipment manufacturer and it is sold individually. Its design allows for an easy control over the spray. This pistol assembly is made out of plastic and metal. Please note the wand is sold separately.

This is an authentic DeWalt replacement part manufactured for use with pressure washers. The rubber nozzle holder attaches to the handle assembly or dashboard and is used to stow the nozzles. This nozzle holder is available as an individual replacement part, please see model diagram for associative parts.

It is a genuine replacement part that is supplied by the original equipment manufacturer for use with Dewalt pressure washers. This is the special cap which is used to keep the oil in the pump, remove the cap to add the oil. If the cap is damaged it must be replaced before continuing to use the equipment. It is a high-quality component which is made of durable red plastic material and it is sold individually.