EasyApplianceParts is now PartSelect! We've merged our sites to provide a better shopping experience for you.   Full Details
✖

Find Parts

Parts Departments

Top Model Types

Top Brands

Repair Help

Expert Repair Videos

Keep typing for more specific results...

DE400EDF1 Frigidaire Dryer - Overview

Enter a part description. DIY Heroes keep it simple, eg. "belt" or "pump".

Search filter:
Clear Filter
Your search term must have 3 or more characters.
Rear Drum Bearing Kit – Part Number: 5303281153
$37.35
In Stock
Rear Drum Bearing Kit
★★★★★
★★★★★
(114)
Part #5303281153
This rear drum bearing kit is designed for use with dryers. It supports the rear of the drum in your appliance as it tumbles your clothes during the drying cycle. If your drum will not tumble, or if it is making a lot of noise, it could be an issue with this part. This is a ball-and-socket style bearing. You will need to replace this if the bushing has worn out, or if the ball support is damaged. This kit includes one bearing, one ball shaft, one ball bearing, one ball bearing retainer, a small tube of high temperature lubricant and installation screws. Unplug your dryer before you begin this repair.
Drum Support Bearing – Part Number: 131825900
$10.93
In Stock
Drum Support Bearing
★★★★★
★★★★★
(21)
Part #131825900
If your dryer does not tumble, will not start, is noisy, or is leaving marks on your clothing, you may need to replace the drum support bearing. The drum is supported at the rear by a bearing, which attaches onto the inside of the rear panel of the cabinet. You will need to remove the dryer drum before completing this repair. Although replacing the drum support bearing is a fairly easy job, you will need tools to complete it. For this repair, you will need a putty knife, a Phillips screw driver, a 5/16 nut driver and maybe a small flat blade screw driver.
Door Catch – Part Number: 131658800
$62.37
In Stock
Door Catch
★★★★★
★★★★★
(31)
Part #131658800
The door catch on your dryer is an important part as it keeps your dryer door closed, in order to ensure no air or clothes can escape. This part works by holding the door strike, which allows the door to stay secure. Before you begin this repair make sure to disconnect the power supply to the dryer. The tools you will need for this installation include a Phillips screwdriver and a small flat blade screwdriver. A pair of pliers may also come in handy. Users ranked this repair as easy, and say that it will take fifteen minutes or less to complete.
Door Latch Kit – Part Number: 5366021400
$60.45
In Stock
Door Latch Kit
★★★★★
★★★★★
(13)
Part #5366021400
The door latch is designed to keep your dryer door closed, even during the drying cycle. If your dryer door will not stay closed, the drying cycle might not start, or it could stop suddenly. If you notice this is happening, check the latch itself for any physical damage. If you notice that it is damaged, the latch should be replaced straight away. This genuine OEM part is compatible with different brands and models, so check to make sure it will properly fit yours before ordering. This door latch kit comes with both the strike and the catch. We suggest replacing both parts of the door latch at the same time.
Main Terminal Block Kit – Part Number: 5304409888
$40.60
In Stock
Main Terminal Block Kit
★★★★★
★★★★★
(14)
Part #5304409888
Terminal block kits are also known as terminal boards, or terminal strips, and they are found in a wide variety of household appliances. Most often in ranges, wall ovens, and dryers. This kit attaches the power cord to the inner wiring of your appliance. If the terminal block is faulty, your appliance will not get the power it needs to operate properly. When removing the old block pay close attention to the wire placement, this will make installing your new part much easier. If you notice any of the wires or wire terminals are corroded or damaged they will also need to be replaced.
Dryer Drum Bearing Bracket – Part Number: 131724301
$22.97
In Stock
Dryer Drum Bearing Bracket
★★★★★
★★★★★
(2)
Part #131724301
This drum bearing bracket is for dryers. Drum bearing bracket holds and supports the drum bearing
Flat Style Belt – Part Number: 5303281154
$24.15
In Stock
Flat Style Belt
★★★★★
★★★★★
(6)
Part #5303281154
This is a flat style ridgeless dryer belt.
Idler Pulley Assembly – Part Number: 5303212849
No Longer Available
Idler Pulley Assembly
★★★★★
★★★★★
(3)
Part #5303212849
Use this idler pulley assembly with gas or electric clothes dryer that has a flat dryer belt. ***Please NOTE: This part has been redesigned by the manufacturer and may not fit your appliance.
Seal – Part Number: 134417000
$19.74
In Stock
Seal
★★★★★
★★★★★
(1)
Part #134417000
Adhesive is sold separately.
High Temperature Lubricant – Part Number: 5303307893
No Longer Available
High Temperature Lubricant
Part #5303307893
Idler Spring – Part Number: 5303281085
$23.01
Special Order
Idler Spring
Part #5303281085
With the spring it helps keep the tension in the belt by pulling the idler pulley.
Screw – Part Number: 131382300
$25.25
In Stock
Screw
Part #131382300
This screw is a little over an inch long.

Common Symptoms of the DE400EDF1

How this model fails, and the parts that fix it.

Watch our pros, then fix it yourself.

See how others fixed this model. Time, tools, difficulty, and steps that lead to victory! View More

Search repair tips from other customers using simple keywords like "replace", "fit", "remove", "inspect". DIY doesn't mean you have to do it alone!

Search filter:
Clear Filter
Your search term must have 3 or more characters.
Loud Squeaking
355 of 383 people found this instruction helpful.
  • Frank from Boyertown, PA
  • Easy
  • 15 - 30 mins
  • Nutdriver, Screw drivers
1. Unplug dryer from outlet
2. Using Lg. flat screwdriver, pry under the front edge of the top and release two spring tabs
3. Lift up top and tilt back out of your way
4. Unscrew two phillips scews on inside of front panel
5. Lift up and out the front panel. Two spring clips at bottom.
6. Rlease tension on drum be lt at the motor. Access panel at rear of dryer.
7.Unscrew 3 screws from inside, center rear of drum.
8. Remove drum through the front of the dryer. You may have to spread the sides apart a little bit for it to fit
9. Lift up on the rear drum bearing to remove it from the bearing retainer. ( U shaped plastic socket)
10. unsrew 2 screws and remove the bearing retainer, ground ball. Ball retainer is on outside of dryer.
11. Vacuum everything--duct, blower, lint trap, ect.
12. Intall new bearing retainer and grounding ball, an assistant is helpful at this time, one to hold ball retainer on rear of dryer, one to screw it in from the inside
13. reassemble remainder of parts in reverse order.
Was this helpful?
Thank you for voting!
Cord was not tightened enough by delivery crew.
109 of 174 people found this instruction helpful.
  • Timothy from Spring Valley, AL
  • Really Easy
  • 15 - 30 mins
  • Screw drivers, Socket set
PF alarm appeared on display. Noticed clicking when cord was moved. Had arced for some time and melted original block. New part slightly different. Only has 3 lugs, old one had six. Stack using washers provided. Take note of colors before disassembly. Use caution while working through access opening. The edges are sharp. Only tools neede d are phillips screwdriver, deep socket for lug nuts. Nut driver optional. Hope this is helpful.
Was this helpful?
Thank you for voting!
Catch broke, door wouldn't stay closed.
72 of 77 people found this instruction helpful.
  • Dianne from Kansas City, MO
  • Really Easy
  • Less than 15 mins
  • Pliers, Screw drivers
Used a screwdriver to pop out broken piece. Used pliers to snap in new one.
Was this helpful?
Thank you for voting!