DCW200BR (Type 2) DeWALT Sander Grinder - Overview

This authentic OEM dust bag assembly is sourced from the original manufacturer for use in sanders. It consists of a fabric bag and plastic cap measuring approximately 5.5 inches in length and 2.5 inches in diameter. The bag assembly collects the dust and debris that is produced during sanding allowing you to maintain a clean and safe work...Read moreing environment. Over time the bag may tear or wear down, leading to large amounts of dust escaping into the air, health hazards from dust inhalation, reduction in visibility, and a messy work area. Replacing the dust bag assembly is a simple repair that does not require the use of specialized tools. Simply detach the bag from the sander, remove any dust and debris on the mounting surface, and attach the new bag.

This replacement screw is a high quality hardware commonly utilized on Bostitch, Black and Decker, Porter Cable and Dewalt equipment. This is a authentic OEM item which has multiple applications depending on the unit, for correct location and use of this screw make sure to check appropriate diagrams. Please note this torx screw is sold individually.

It is an authentic item which is supplied by the original equipment manufacturer for use with Black and Decker, DeWALT and Porter Cable sanders. The paper punch is designed to perforate a standard sandpaper when using the sander with a dust collection system. The holes will allow the dust to be picked up from the work surface. It is a hig...Read moreh-quality replacement for a damaged or a missing component that was included with a new unit. Using it does not require any tools, once the sandpaper is installed, align the corners of the paper punch with the corners of the sanding pad and press the paper punch through the sandpaper sheet. One durable plastic paper punch is included.

This replacement screw is an authentic OEM sourced item, not an aftermarket equivalent. This is screw is used in a lot of different applications depending on your tool. Please check appropriate diagrams for correct use and location of this screw. This pan head screw is sold individually. You will need a torx screwdriver when working with this hardware.