DCMWSP244U2R (Type 1) DeWALT Lawn Mower - Overview

This trail shield, also referred to as a rear skirt, is designed for use with various makes and models of lawn mowers and is a genuine OEM part. This trail shield is sold as an individual part without its securing hardware, and measures 16.5-inches long and 4.5-inches wide. It features a notch on both sides to secure it to the rear of the...Read more mower chassis and prevent glass clippings, dirt and other debris from hitting the user. This shield is made of durable plastic, meaning over time it can crack, and when your current trail shield is broken or damaged, it is crucial that you replace it. To replace it, remove the bag from your mower and simply lift out the old shield and install the new one.

The Blade Support (Bell Blade Support) fits between the bottom of the blade and the blade bolt to provide support for the blade. It is installed underneath the cutting deck on the blade. Installation requires a hammer, 5/8 socket and torque wrench, and is rated as "Easy" by our customers. If broken or damaged (likely due to fatigue) you m...Read moreay hear a rattling sound coming from it, and the part should be replaced. This part is dark gray/silver, individually sold, and measures approx 3.5 x 1.25 inches. Refer to your make, model and diagrams to check if this is the correct part for you.

This replacement screw is a genuine item that is sourced from original equipment manufacturer. It is a high quality hardware that is commonly used with walk-behind lawn mowers. This screw has multiple uses depending on your model. Please make sure to check appropriate diagrams for correct location and use of this hardware. You will need a wrench when working with this screw.

This is a Manufacturer Approved replacement part used on a variety of Lawn Mowers. This part is made out of Plastic and it is Sold Individually. This plastic Cover helps to keep dirt and debris away from Wheel and gears.

This hinge pin is an OEM part that is designed to hold the chute to the bracket of your lawn mower, allowing the shute to move upward and downward. It is silver, made of metal, and it is around 5 inches in length. Over time, the hinge pin may break, and it will no longer be able to support the chute or allow it to move. If this occurs, ...Read moreyou will need a pair of needle nose pliers to complete this simple repair, which most of our customers told us was easy. Look for the hinge pin on the chute door and the mounting bracket of your mower deck.

This is a genuine manufacturer approved replacement mulching door torsion spring designed for use with lawn mowers. It allows for the mulching door to retract. This torsion spring is made out of metal and it is sold individually. Replacing this item you would need a wrench and pliers.

It is a genuine manufacturer-sourced item that is supplied by the original equipment manufacturer for use with DeWALT power tools. This is an identical replacement for a missing or damaged bearing assembly that was installed on a new unit, please make sure to check the appropriate diagrams of your model for the correct location and applic...Read moreation of this hardware. Keep in mind this high-quality part is made of durable metal and is sold individually.

This is a genuine replacement part manufactured for use with lawn and garden power equipment. This versatile screw has a flanged hex head and can be used in a variety of applications. The screw is available as an individual replacement part, please see model diagram for part location and usage.

This item is an original part from MTD, Yard Man, Yard Machines, and Troy-Bilt for use in lawn mowers and lawn tractors. The spring body is made of durable material and attaches to the compression spring. A set of pliers may be necessary during the installation of this item. It may become broken and will need to be replaced. This is available as an individual replacement part.

This part is an OEM from Troy-Bilt, MTD, Yard Machines, Yard-Man for use with Lawn Mowers. The axle assembly attaches the wheels to the lawn mower. The most common reason for replacing the front axle is when it is damaged and the mower isn't cutting evenly. This part is sold individually. The tools that you will need to replace the axle a...Read moressembly is a flat-head screwdriver, 9/16 inch nut driver and a large flat-head screwdriver.

This replacement screw is a high quality hardware commonly utilized on Bostitch, Black and Decker, Porter Cable and Dewalt equipment. This is a authentic OEM item which has multiple applications depending on the unit, for correct location and use of this screw make sure to check appropriate diagrams. Please note this torx screw is sold individually.