My Orders
DC24D6-A Maytag Dishwasher - Overview
Diagrams for DC24D6-A
See every part. Know exactly what you need.
Enter a part description. DIY Heroes keep it simple, eg. "belt" or "pump".
Search filter:
Clear Filter
Your search term must have 3 or more characters.
$7.47
In Stock
$47.40
In Stock
Dishwasher Faucet Adapter
Part #WPW10254672
The faucet adapter for your portable dishwasher or washing machine attaches to the faucet and allows you to connect the machine to the tap. Before you install the faucet adapter on your taps, be sure that it fits the coupler on your dishwasher or washer. As per the factory, this is used for faucets with inside or outside threads. For fema...Read morele connection (outside) just remove the washers. This adapter is approximately 1 inch in length, and slightly less than one inch in diameter. This adapter comes with two different thicknesses of rubber washer. You will not need to use both so be sure to determine which thickness works best for your tap before installing it.
Read less
$9.62
In Stock
Hose Clamp
Part #WP285655
The hose clamp is used to hold the water hose in place which will prevent the hose from leaking water. Sometimes the clamp may lose its ability to latch on, causing a leaking washer. For the installation, you will need a flat head screw driver to replace the clamp and a drill to access the screws to remove the front of the washer. Be care...Read moreful if you do not have specific clamp pliers as the clamp could fly off. Once the front of the washer has been removed, take a quick look for water damage or any obvious signs of where the leak is coming from. If it is not obvious, run water to test.
Read less
No Longer Available
Washer Inlet Hose Washer
Part #WPY013783
This inlet hose washer, also known as a high pressure inlet hose washer, is used in washing machines, refrigerators, freezers, and dishwashers. The function of this part is to create a watertight seal in the appliance. If your gasket gets dry and brittle over time it will start to crack and will lose its function. In this case, it is impo...Read morertant to replace it. Refer to the manual provided by the manufacturer for further installation instructions and accurate guidance. As a safety precaution, remember to unplug your washer from the power source before beginning.
Read less
No Longer Available
Dishwasher O-Ring
Part #WP912510
$8.55
Special Order
$41.07
Special Order
Faucet Adapter Washer
Part #910209
$10.70
Special Order
Dishwasher Coupler Gasket
Part #WP910218
This authentic OEM coupler gasket creates a watertight seal between your dishwasher hose and the faucet or the water inlet. It ensures leak-free operation and maintains proper water flow during dishwashing. Signs of a broken or worn-out gasket include poor or inconsistent water flow in the dishwasher, resulting in dirty dishes even after ...Read morea cycle. Additionally, a faulty gasket may cause water to drip or spray around the faucet connection or under the sink, potentially leading to water damage. To remove your existing gasket, you will need to locate it within the back panel of the appliance with the help of your user manual. Detach the faucet adapter from the hose by untwisting it. With a flathead screwdriver or pliers, pry the coupler gasket from your appliance. Please note that this replacement part is sold individually.
Read less
No Longer Available
Dishwasher Door Spring
Part #5300808971
Sold Individually. Suggested to replace both at the same time.
$7.47
Special Order
$10.70
In Stock
Water Tubing Clamp
Part #W10833902
This water tubing clamp keeps the 3/16-inch diameter water tubing mounted to your refrigerator. Its purpose is to prevent shifting, kinking, or loosening of the tubing, ensuring a consistent water flow for the water dispenser and ice maker. It is typically located at the back of the cabinet near the inlet valve. If the clamp securing the ...Read moretubing in your refrigerator is not properly secured, it can result in leaks or complete detachment. This poses a risk of water damage to your fridge, flooring, and nearby structures if not addressed promptly. To replace the clamp, refer to your user guide for its location. Then, use a screwdriver to remove the securing screw. Please note that this clamp is sourced directly from the original equipment manufacturer and does not include any additional hardware.
Read less
$7.47
Special Order
Screw
Part #WP22001496
Common Symptoms of the DC24D6-A
How this model fails, and the parts that fix it.
Leaking
Fixed by
these parts
these parts
Show All
Will not fill with water
Fixed by
these parts
these parts
Show All
Not cleaning dishes properly
Fixed by
these parts
these parts
Show All
Will not drain
Fixed by
these parts
these parts
Show All
Watch our pros, then fix it yourself.
See how others fixed this model. Time, tools, difficulty, and steps that lead to victory!
View More