D51822 (Type 5) DeWALT Nailer - Overview

This special grommet is an original part which is specially designed for use with DeWALT and Porter Cable staplers and nailers. It is utilized to secure the pin that holds the adjuster. This is a high-quality replacement for a damaged or a missing grommet that was installed on a new unit. To ensure the correct location and application of ...Read morethis part, refer to the appropriate diagrams of your model. It is made of durable rubber and is sold individually. You may need pliers to remove and secure the grommet with the pin.

O-rings are made to contain thousands of PSI pressure by creating a seal between two or more parts. O-ring measurements are specified by the inside diameter and the thickness. Of the many causes for O-Ring failure, the most common among power tools are: Extrusion and Nibbling - O-ring has ragged, tattered edges. These are commonly caused...Read more by pressure spikes which shear off tiny "bites" from the o-ring, or caused by clearance gaps. Abrasion - One or both sides of the o-ring appear rough and slightly flattened. Commonly caused by a contact surface that it too rough, contains grit or is too smooth to allow lubrication. Over Compression - O-ring is flattened on both sides and may have a "ring" split along its length. Commonly caused by excessive pressure or heat. Heat Hardening - O-ring has a pitted or cracked surface, and often is flattened on both sides. Caused by temperature exceeding o-ring capacity. Weather/Ozone Cracking - O-ring is covered in small surface cracks. Caused by exposure to ozone, UV rays and air pollution. Excessive seal stretching causes similar cracking.

O-rings are made to contain thousands of PSI pressure by creating a seal between two or more parts. O-ring measurements are specified by the inside diameter and the thickness. Of the many causes for O-Ring failure, the most common among power tools are: • Extrusion and Nibbling - O-ring has ragged, tattered edges. These...Read more are commonly caused by pressure spikes which shear off tiny "bites" from the o-ring, or caused by clearance gaps. • Abrasion - One or both sides of the o-ring appear rough and slightly flattened. Commonly caused by a contact surface that it too rough, contains grit or is too smooth to allow lubrication. • Over Compression - O-ring is flattened on both sides and may have a "ring" split along its length. Commonly caused by excessive pressure or heat. • Heat Hardening - O-ring has a pitted or cracked surface, and often is flattened on both sides. Caused by temperature exceeding o-ring capacity. • Weather/Ozone Cracking - O-ring is covered in small surface cracks. Caused by exposure to ozone, UV rays and air pollution. Excessive seal stretching causes similar cracking.

This is a Genuine OEM replacement part used on some Dewalt Nailers and Staplers. This item includes a new valve and o-rings. If your tool is leaking air or the trigger valve is stuck, replacing this part may resolve the issue.

This replacement o-ring is a high quality item that is specially produced for Dewalt framing nailers. It is used to provide an air tight seal between the bumper and the collar. For correct location and application of this part please make sure to check appropriate diagrams. Note that this rubber o-ring is sold individually.

This authentic manufacturer-supplied part is specially designed for use with Porter Cable and DeWALT nailers and staplers. It is a special hardware that helps to secure the trigger. This is an identical replacement for a missing or a damaged component that was installed on a new unit. Make sure to refer to the appropriate diagrams for you...Read morer model to ensure the exact location and the proper replacement procedure. One durable metal pin is included. Pliers will be needed to perform this repair.

This is an authentic OEM sourced replacement component that is specially produced for use with DeWalt framing nailers. The o-ring is generally utilized to provide an air-tight seal between connected parts, please make sure to refer to the appropriate diagrams of your model for the correct location and application of this hardware. Unfortu...Read morenately, over time the material will wear out and may begin to fail eventually requiring a replacement to maintain peak performance. Keep in mind this high-quality item is made of durable rubber and is sold individually.

This is an authentic manufacturer-sourced replacement part which is specially designed for DeWALT framing nailers. This o-ring provides an air-tight seal for between connected parts, please make sure to refer to the appropriate diagrams of your model for the correct location and application of this component. Over time the material may we...Read morear out, get compressed and begin to crack eventually requiring a replacement to maintain peak performance. Keep in mind this high-quality o-ring is made of durable rubber and is sold individually.