EasyApplianceParts is now PartSelect! We've merged our sites to provide a better shopping experience for you.   Full Details
✖

Find Parts

Parts Departments

Top Model Types

Top Brands

Repair Help

Expert Repair Videos

Keep typing for more specific results...

D21G2 General Electric Range - Instructions

All Instructions for the D21G2
1 - 9 of 9

Search repair tips from other customers using simple keywords like "replace", "fit", "remove", "inspect". DIY doesn't mean you have to do it alone!

Search filter:
Clear Filter
Your search term must have 3 or more characters.
The oven's bottom bake element burned up
19 of 23 people found this instruction helpful.
  • Dennis from Los Alamos, NM
  • Really Easy
  • Less than 15 mins
  • Socket set
First I turned the circuit breaker switch off for the stove unit. I then removed the two screws that hold the element in place at the back of the oven. I then pulled the element out about 3 inches and disconnected the two wires. I attached the new element, bolting the wires into place and then screwed the element back into place on the back wall of the oven. I flipped the breaker switch back on, and turned on the oven. I was done in roughly 15 minutes. The most difficult part was having to shine a flash light into the oven to replace the part, and negotiating the hard cold kitchen floor.
Was this helpful?
Thank you for voting!
The oven element burned completely into.
10 of 12 people found this instruction helpful.
  • John from Kiowa, CO
  • Really Easy
  • Less than 15 mins
  • Nutdriver
I first removed the two screws holding the element in place. Then I pulled the element out about 2 or 3 inches and then took out the 2 small screws holding the 2 wires in place. I then removed the old element and discarded it and installed the new one in the reverse order that I took out the old one. It was quite easy to do, only took abo ut 10 to 15 minutes total time.
Was this helpful?
Thank you for voting!
Burned out
6 of 11 people found this instruction helpful.
  • Jeff from Phoenix, AZ
  • Really Easy
  • Less than 15 mins
  • Screw drivers
First I removed the two screws that hold the element in place. I then pulled the element out about 3 inches and disconnected the two wires...)
Was this helpful?
Thank you for voting!
Old drip bowls could not be cleaned
0 of 1 people found this instruction helpful.
  • Karl from Kempner, TX
  • Really Easy
  • Less than 15 mins
Replaced drip bowls.
Was this helpful?
Thank you for voting!
Old drip pans rusted out.
  • Joseph from San Antonio, TX
  • A Bit Difficult
  • Less than 15 mins
Range is 45 yrs old. New drip pans are different shape. This is only place which had them and VERY GOOD price. Delivery was quick, too!
Was this helpful?
Thank you for voting!
I needed new Drip Pans
  • Gloria from San Jose, CA
  • Really Easy
  • Less than 15 mins
I purchased a set of drip pans at the store only to find out that they were not for GE Ranges. I got on line and inquired and your representative was very helpful. The repair was easy. After cleaning the stove I removed the old drip pans and installed them one by one. No problem!
Was this helpful?
Thank you for voting!
old stained drip bowls
  • Peter J from Oceanside, CA
  • Really Easy
  • Less than 15 mins
I tried first to replace them, with a set I bought at a local hardware store. But they were too small. So I went on the internet, and found Part Select, and thanks to a very helpful guy, who made the extra effort to find the exact drip bowls, I now have a nice, shiny stove-top again. Installing them took two minutes... tilt the burners u p, and slide them in. No problem.
Was this helpful?
Thank you for voting!
Element burned into.
  • Erbin from Poquoson, VA
  • Really Easy
  • 15 - 30 mins
  • Screw drivers
TURN POWER TO OVEN OFF AT POWER PANEL 1- Remove element: 2 screws ... cut wire at element because of burned area. 2- Crimp two new wire lug connectors onto wire and attach to new element with supplied screws. 3- Attach e lement to back of oven: 2 screws ... TURN POWER ON AGAIN AND TEST OVEN
Was this helpful?
Thank you for voting!
All Instructions for the D21G2
1 - 9 of 9