EasyApplianceParts is now PartSelect! We've merged our sites to provide a better shopping experience for you.   Full Details

Find Parts

Parts Departments

Top Model Types

Top Brands

Repair Help

Expert Repair Videos

Keep typing for more specific results...

D1608TB (ASTEECI) LG Dishwasher - Overview

Diagrams for D1608TB

See every part. Know exactly what you need.

Enter a part description. DIY Heroes keep it simple, eg. "belt" or "pump".

Search filter:
Clear Filter
Your search term must have 3 or more characters.
Hinge Cable – Part Number: 4933DD3001B
$18.22
In Stock
Hinge Cable
★★★★★
★★★★★
(30)
Part #4933DD3001B
This dishwasher door hinge cable assembly connects the door to the spring. The door hinge cable and the door spring apply tension to the door to prevent it from dropping open too quickly. This part contains two plastic pieces which are approximately 2 inches in length by 3/4-inch in width, as well as a rope portion that measures approximately 8 inches in length. When beginning this repair, be sure to use caution when replacing the door hinge cable. The spring to which the door hinge cable attaches is under tension and could snap. This part is sold individually.
Dishwasher Roller Assembly – Part Number: 4581DD3003C
$15.00
In Stock
Dishwasher Roller Assembly
★★★★★
★★★★★
(16)
Part #4581DD3003C
The dishwasher roller assembly connects to the dishrack, and is located in the lower level of the dishwasher. It allows the dishrack to easily slide in and out. If the lower rack keeps falling off the track in your dishwasher, makes noises, the door will not close, or the dishes are not getting clean, then it is best to replace it for more security. A flat blade screw driver is the only tool needed for this installation. Open the lower dishwasher rack and remove retaining tabs from both ends of the rack and slide it out. Locate the older roll assembly, remove it and replace the rollers. Remember to put the tabs on each side back before sliding it back in. Make sure the dishwasher is off before starting this installation project.
Roller with Axle – Part Number: 4581DD3002A
$12.85
On Order
Roller with Axle
★★★★★
★★★★★
(10)
Part #4581DD3002A
The rack roller and axle in your dishwasher allows the dish rack to slide in and out effectively.If you notice that your dish rack is not performing this function, or if one or more of your rack rollers are damaged, you should consider replacing it. The roller attaches to the dish rack with the axle, both are included in this part. This part is gray in color, and measures 1 inch in diameter. With the axle, this part is approximately 1-1/2 inches wide. To access the rack roller and axle, you will need to remove the top dish rack from your dishwasher.
Dishwasher Hinge Spring – Part Number: 4970ED4004G
$29.47
In Stock
Dishwasher Hinge Spring
★★★★★
★★★★★
(6)
Part #4970ED4004G
The door spring, used in dishwashers, adds tension to the door through the door hinge to keep it from opening too fast. If you have a door latch failure or your washer door drops too quickly when opened, it is best you replace this part to fix the problem. Refer to the manual provided by the manufacturer for installation instructions and further repair guidance. Unplug your dishwasher from the power source before you begin this repair project as a safety precaution.
MOTOR ASSEMBLY,AC,PUMP – Part Number: EAU61383518
$105.35
In Stock
MOTOR ASSEMBLY,AC,PUMP
★★★★★
★★★★★
(3)
Part #EAU61383518
On a washer, this part is used for circulating the water. On a dishwasher, it is used for draining the water during operation. If you notice your appliance is not draining properly, the circulation pump motor may need to be replaced. If this part is for your washer, you may notice your clothes are not cleaning properly. In your washer, to access this part you will need to remove the entire front panel. The circulation pump is 120 volts and 30 watts. The part is white in color and is sold individually. This OEM part comes directly from the manufacturer.
Gasket – Part Number: 3920DD3005H
$65.73
In Stock
Gasket
★★★★★
★★★★★
(14)
Part #3920DD3005H
This dishwasher door gasket is designed to form a secure, watertight seal around the tub, preventing leaks and enhancing overall wash efficiency. Constructed from flexible, heat-resistant black rubber, it withstands temperatures up to 150°F and resists wear over time. By maintaining a tight seal, the gasket ensures that water and steam remain contained within the dishwasher during operation, contributing to more effective cleaning cycles and reduced energy waste. A worn or damaged gasket can lead to water pooling, inefficient washing, and potential damage to surrounding cabinetry. Replacing it restores proper function and helps extend the appliance’s lifespan. Installation is straightforward, requiring the gasket to be pressed into the door channel for a snug fit.
Pump Gasket – Part Number: MFZ32863101
$15.00
In Stock
Pump Gasket
★★★★★
★★★★★
(14)
Part #MFZ32863101
This is a pump gasket, also known as a pump housing seal, for a dishwasher. The gasket is fitted around the edge of the pump, preventing leakage between the pump housing and the filter housing. Located at the bottom of the dishwasher, the pump circulates and drains water from the dishwasher. Age and dishwasher detergents can dry out the pump gasket and cause it to fail and leak. Leak from the pump is not always noticeable until you remove access panels from your appliance. This part is made of rubber and is black in color. It is an OEM part from the genuine manufacturer.
Basket Assembly – Part Number: 5005DD1001B
$44.23
In Stock
Basket Assembly
★★★★★
★★★★★
(10)
Part #5005DD1001B
Presenting the LG Silverware Basket Assembly for some dishwasher models. This product is a genuine LG item, specially constructed for accommodating small utensils in the lower dishrack during the dishwashing cycle. The basket assembly ensures that your forks, spoons, and knives are held in place securely. For installing this essential piece, refer to your dishwasher owner's manual. Make certain the part is appropriate for your model before confirming your purchase, as parts could appear similar but may slightly differ in size or shape. Remember, this is an authentic LG part, offering guaranteed compatibility and top performance for your dishwasher.
Accessory Assembly – Part Number: 5001DD4001A
No Longer Available
Accessory Assembly
★★★★★
★★★★★
(5)
Part #5001DD4001A
This is an accessory assembly, otherwise known as a mounting bracket kit, for a dishwasher. This kit includes two brackets, a hose clamp, and two screws. The brackets are perforated so they can be cut or broken to the desired length if they stick out from underneath the countertop. The accessory kit is used to mount the dishwasher to the side of the cabinet or underside of the countertop, depending on your appliance. This kit can be used with both top or side mounting applications. Be sure to use work gloves when completing this repair to avoid injury. This is a genuine replacement part.
Drain Hose Assembly – Part Number: AEM69493807
$52.67
In Stock
Drain Hose Assembly
★★★★★
★★★★★
(2)
Part #AEM69493807
Replacement dishwasher drain hose. Per the manufacturer if the drain hose being replaced does not have the vent tube going to the water inlet assembly a new water inlet will be needed.
Diverter Motor - 120V 60Hz – Part Number: 4681ED3001D
$53.20
In Stock
Diverter Motor - 120V 60Hz
★★★★★
★★★★★
(7)
Part #4681ED3001D
This diverter motor, or stepper motor, controls the movement of the spray arms in your dishwasher. It directs water between the drain pump and the spray arms by turning a check valve inside the pump, managing the flow of water to these spray arms. This diverter motor runs on 120 volts and 60 Hz. When this motor fails, the dishwasher will not wash or drain properly. Please keep in mind that this genuine OEM replacement part is sold separately from the spray arms.
Dishrack Upper – Part Number: AHB32983761
$197.48
In Stock
Dishrack Upper
★★★★★
★★★★★
(6)
Part #AHB32983761
The upper dishrack assembly is an essential component of your LG dishwasher, designed to hold dishes securely in place during the dishwashing cycle. This genuine OEM replacement part is manufactured to meet the highest quality standards, ensuring durability and a perfect fit for select LG dishwasher models. Crafted with precision, this upper dishrack provides ample space and an organized structure for plates, glasses, bowls, and other items, optimizing the cleaning process. Before purchasing, confirm compatibility with your dishwasher model to ensure the correct fit, as slight variations in size and shape may exist between models. This genuine LG component is stocked and ready for quick shipment, so you can restore your dishwasher's performance with minimal downtime.

Common Symptoms of the D1608TB

How this model fails, and the parts that fix it.

Watch our pros, then fix it yourself.

See how others fixed this model. Time, tools, difficulty, and steps that lead to victory! View More

Search repair tips from other customers using simple keywords like "replace", "fit", "remove", "inspect". DIY doesn't mean you have to do it alone!

Search filter:
Clear Filter
Your search term must have 3 or more characters.
Broken door spring allows the door to overextend to the floor if not propped.
35 of 43 people found this instruction helpful.
  • Gregory L from INDEPENDENCE, OH
  • Easy
  • 15 - 30 mins
  • Screw drivers
Simple, removed screws securing machine in the cabinet, then pull the unit out of the cabinet space about 10 inches. Springs are accessible within this extension. You need strong hands to extend the springs and attach them. Once attached, push machine back in place and re-install the anchor screws. In my situation, only one spring was bro ken, so the attached side revealed the correct slot to place the hook on the top position, the bottom position has a plastic lead for the spring, and that lead is attached to a rope to the door hinge. Note: Replace BOTH springs, even if only one is broken.
Was this helpful?
Thank you for voting!
Dishwasher leaking; got AE error almost every other wash
12 of 20 people found this instruction helpful.
  • Bruce from Katy, TX
  • Really Easy
  • 30 - 60 mins
The inside gasket deteriorates over time - However replacement is easy. the main thing you have to remember is after you remove the old gasket, install the new one starting at the middle top of the tub and work your way down both sides. Also, don't push the gasket all the way in...only enough to hold in place. When you close the door the gasket will form a better seal around the door.
Was this helpful?
Thank you for voting!
Door was very heavy due to spring problem
7 of 7 people found this instruction helpful.
  • Greg S from BELLE ISLE, FL
  • Easy
  • 15 - 30 mins
  • Pliers, Screw drivers
Turn off the power at breaker box. Disconnect the power at dishwasher since I needed to pull the unit all the way out of the cabinet to get to screws on the back side for this model. Find and remove the screws to the cover. Remove cover. In my case, the rope on the connector assembly had snapped. I replaced spring and connector identicall y to functioning side. Did need a pair of pliers to provide enough tension on spring to install. Reconnected cover and power and moved back into the cabinet. Easy repair and my wife wondered why I hadn't done it sooner.
Was this helpful?
Thank you for voting!