CV490S-27507 Kohler Engine - Overview

This OEM part is sold individually and is a direct replacement part sourced from the manufacturer. The Woodruff Key is used to allow mating parts such as a shaft and gear to rotate together. It is made of silver-colored metal and is found in various locations, depending on your model. This part will wear over time and needs to be replace...Read mored when damaged, worn, or if the mating parts no longer rotate together. Customers rate this repair as Easy.

It is an OEM item that is made for use with Kohler engines commonly installed on a variety of lawn and garden equipment. This is the valve that the push rod ride inside of which will push the exhaust valve open during the exhaust stroke. A bent push rod or a damaged lifter-valve can not only affect your engine\\\'s performance, they can s...Read moreeriously damage other parts if the problem is not taken care of immediately. This is a high-quality replacement for a missing or a damaged component that was installed on a new unit. To ensure the correct location and installation of this item, refer to the diagrams of your specific model. Note, one durable metal lifter-valve and a tube of lube are included. You will need a screwdriver and a wrench set to take apart the engine when performing this repair.

This is an original replacement part manufactured for use with Kohler small engines. The flanged hex nut is typically used as a fastener on the governor control assembly. This nut can have multiple uses, please see model diagram for part location and usage. The flanged nut is available as an individual replacement part.

It is a genuine manufacturer-sourced replacement screw which is produced for use with Kohler engines commonly installed on lawn and garden equipment. This part has multiple applications depending on the model of your unit, please make sure to check appropriate diagrams for the correct location and use of this hardware. Over time the threa...Read moreds may wear out or the part may simply get lost eventually requiring a replacement. It is a high-quality hex head screw which is sold individually.

This item has been OEM sourced to ensure quality. The gasket is intended to be used with lawnmower engines from Kohler, MTD, Ryobi, and Yard-Man. The gasket is used to seal the connection between the exhaust pipe and the cylinder assembly. The exhaust manifold gasket is priced as a single item.

Sourced directly from the manufacturer, this 6mm Flat Washer is made of durable dark grey metal, is not part of a kit or assembly, and is sold individually. This part should be replaced when it is damaged, worn, or can no longer spread the load under a bolt sufficiently. This Washer is found in various locations, depending on your model. Customers rate this repair as Easy.

This is an authentic replacement part that is supplied directly from original equipment manufacturer for use with Kohler engines commonly installed on lawn and garden equipment. The ignition module also is known as armature-magneto provides electric current for the ignition system by producing pulses of high voltage for the spark plugs. I...Read moret is made of high-quality metal with a rubber insulated wire and it is sold individually, the spark plug boot is included.

This item is available as an individual replacement part. The screw attaches to the ignition module and is made of metal. If this item becomes stripped or broken it will need to be replaced and may require a wrench during the installation. This is an OEM part sourced directly from the manufacturer and used in engines made by Kohler and Toro.