CV25S-6926 Kohler Engine - Overview

This OEM part is sold individually and is a direct replacement part sourced from the manufacturer. The Woodruff Key is used to allow mating parts such as a shaft and gear to rotate together. It is made of silver-colored metal and is found in various locations, depending on your model. This part will wear over time and needs to be replace...Read mored when damaged, worn, or if the mating parts no longer rotate together. Customers rate this repair as Easy.

It is an OEM item that is made for use with Kohler engines commonly installed on a variety of lawn and garden equipment. This is the valve that the push rod ride inside of which will push the exhaust valve open during the exhaust stroke. A bent push rod or a damaged lifter-valve can not only affect your engine\\\'s performance, they can s...Read moreeriously damage other parts if the problem is not taken care of immediately. This is a high-quality replacement for a missing or a damaged component that was installed on a new unit. To ensure the correct location and installation of this item, refer to the diagrams of your specific model. Note, one durable metal lifter-valve and a tube of lube are included. You will need a screwdriver and a wrench set to take apart the engine when performing this repair.

This stator kit (15 amp) is an OEM part direct from Kohler. Composed of metal, wiring and protective plastic, the kit is made for use with many small engines. This component provides the necessary voltage for charging the motor battery. A wrench and a pair of pliers are helpful for making the installation. Please refer to the manual for additional repair instructions.

This replacement fuel pump is a genuine OEM supplied item that is commonly utilzed on Kohler engines installed on lawn and garden equipment. It is used to pump the fuel from the tank into the carburetor. Over time it may begin to fail eventually requiring replacement, it is recommended to periodically check for hairline cracks and other d...Read moreamage to the external surfaces of the pump. Please note one durable plastic body fuel pump is included per order.

This is a genuine replacement part sourced directly from the manufacturer. The breather strap is commonly found in Kohler engines. This part is made of metal, and is used to secure the breather filter canister in place. You may require a wrench when replacing this part. This item is sold individually.

This part is an OEM from Kohler. The exhaust valve (std.) is composed of high-quality metal, and is compatible with many small engines. This part is fitted into the cylinder head assembly. The charged fuel moves through the exhaust valve to the manifold. This item is sold individually. A wrench is often needed in making the repair.

Sourced directly from the manufacturer, this 6mm Flat Washer is made of durable dark grey metal, is not part of a kit or assembly, and is sold individually. This part should be replaced when it is damaged, worn, or can no longer spread the load under a bolt sufficiently. This Washer is found in various locations, depending on your model. Customers rate this repair as Easy.

This breather seal, also known as a breather vent or plug, is used within the engines of various power equipment models. It is used to regulate pressure, protect against dirt, debris and excess moisture, and extend the overall life of the engine it is in. Measuring 1-inch long and approximately 0.5-inches in outer-diameter, this breather seal is a part from the original equipment manufacturer.?