CV18S-61555 Kohler Engine - Overview

This OEM part is sold individually and is a direct replacement part sourced from the manufacturer. The Woodruff Key is used to allow mating parts such as a shaft and gear to rotate together. It is made of silver-colored metal and is found in various locations, depending on your model. This part will wear over time and needs to be replace...Read mored when damaged, worn, or if the mating parts no longer rotate together. Customers rate this repair as Easy.

This Spark Plug is a genuine OEM sourced replacement part for various small engines. It is white and silver, made of metal and ceramic components, and sold individually. The Spark Plug ignites the air-fuel mixture inside the combustion chamber. Before replacing, you can attempt to clean the spark plug with fine sandpaper of around 180 g...Read morerit, followed by spraying it with carburetor cleaner and wiping it dry. If this does not resolve your issue, it will need to be replaced. Ensure you gap and torque it to the manufacturer specifications. To complete this repair, you will need a spark plug socket, a socket set, and a torque wrench. Customers rate this repair as Easy.

This is a high-quality manufacturer-sourced part which is made for use with Kohler engines commonly installed on lawn and garden equipment. It helps to distribute the pressure evenly and provide a tight seal for the valve stem. Over time it may become brittle and begin to crack eventually requiring a replacement. For the proper applicatio...Read moren please refer to the appropriate diagrams of your model. This high-quality part is made of durable rubber material and is sold individually. You will need a screwdriver and a wrench set to take the engine apart and perform the repair.

It is an OEM item that is made for use with Kohler engines commonly installed on a variety of lawn and garden equipment. This is the valve that the push rod ride inside of which will push the exhaust valve open during the exhaust stroke. A bent push rod or a damaged lifter-valve can not only affect your engine\\\'s performance, they can s...Read moreeriously damage other parts if the problem is not taken care of immediately. This is a high-quality replacement for a missing or a damaged component that was installed on a new unit. To ensure the correct location and installation of this item, refer to the diagrams of your specific model. Note, one durable metal lifter-valve and a tube of lube are included. You will need a screwdriver and a wrench set to take apart the engine when performing this repair.

This stator kit (15 amp) is an OEM part direct from Kohler. Composed of metal, wiring and protective plastic, the kit is made for use with many small engines. This component provides the necessary voltage for charging the motor battery. A wrench and a pair of pliers are helpful for making the installation. Please refer to the manual for additional repair instructions.

This is an original replacement part manufactured for use with Kohler small engines. The flanged hex nut is typically used as a fastener on the governor control assembly. This nut can have multiple uses, please see model diagram for part location and usage. The flanged nut is available as an individual replacement part.

This replacement fuel pump is a genuine OEM supplied item that is commonly utilzed on Kohler engines installed on lawn and garden equipment. It is used to pump the fuel from the tank into the carburetor. Over time it may begin to fail eventually requiring replacement, it is recommended to periodically check for hairline cracks and other d...Read moreamage to the external surfaces of the pump. Please note one durable plastic body fuel pump is included per order.

This is a genuine replacement part sourced directly from the manufacturer. The breather strap is commonly found in Kohler engines. This part is made of metal, and is used to secure the breather filter canister in place. You may require a wrench when replacing this part. This item is sold individually.

This part is an OEM from Kohler. The exhaust valve (std.) is composed of high-quality metal, and is compatible with many small engines. This part is fitted into the cylinder head assembly. The charged fuel moves through the exhaust valve to the manifold. This item is sold individually. A wrench is often needed in making the repair.

Sourced directly from the manufacturer, this 6mm Flat Washer is made of durable dark grey metal, is not part of a kit or assembly, and is sold individually. This part should be replaced when it is damaged, worn, or can no longer spread the load under a bolt sufficiently. This Washer is found in various locations, depending on your model. Customers rate this repair as Easy.