CTX22DKGL Hotpoint Refrigerator - Instructions

I took the drawer and shelf out,unscrewed the old slide, then screwed the ne wone in. Put the shelf back in and then slid the drawere right in!

Turned the wire protector to the side. Turned out the old bulb and replaced it with the new. Turned the wire protector back in place and I'm like new.

took out two screws both sides useing philips head screw driver put back same way

was able to grind the edge to map it fit

Replaced auger and front helix kit.

Removed slide from frame and replaced slide. Simple and easy.

The hardest part was figuring out the part needed from so many little pictures. The actual repair, a piece of cake!

I was a bit concerned that I might have selected the wrong part. There were several pictures of rails to choose from with slight variations on the website. Fortunately, it was a correct selection and arrived sooner than expected. The assembly was easy to remove from the refigerator. Two screws that held the slide in place were removed and ... Read more the replacement was installed within minutes. I am very pleased that I chose to use PartSelect.

Less than 5 minutes needed to remove cracked rail and replace with new rail. Must have a star wrench to perform task. Very simple task!