If your pulsator washing machine is no longer agitating effectively, replacing the impeller and connect sleeve (part number 12138000069557) may help restore its optimal performance. This genuine replacement part is designed to maintain the snowblower's washing efficiency by ensuring proper motion and water circulation during cycles. Const...Read moreructed from durable materials for long-lasting use, the impeller and sleeve are engineered to fit seamlessly into compatible models. Installation is straightforward and typically requires only basic tools. Before purchasing, be sure to verify your washing machine's model number to ensure compatibility.
This motor powers internal functions. Replace if overheating or slowing occurs. This part is designed to keep your appliance operating reliably and efficiently. Replacing a worn or failing component helps prevent further issues and can extend the overall lifespan of your unit.
Ask our experts a question about this model and we'll get back to you as soon as possible!
We may have answered a similar question already! Search questions and answers left by others using simple keywords like "fit", "broken", "easy", or "quality" to find questions that match.
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Sort by:
Prev
1
Next
Sorry, we couldn't find any existing answers that matched.Try using some different or simpler keywords, or submit your new question by using the "Ask a Question" button above!
Norma - For model number CTW41N1AW
November 23, 2025
I need a new agitator/base plate mwsb10276
Hello Norma, thank you for getting in touch. According to our research, the baseplate assembly, part number PS18167556, is compatible with your model number. We hope this helps.
Does the lid come by its self. My lid had crumbled at the hinge on the side opposite the controls
Hi Alice, thank you for contacting us. Yes, the top cover assembly for your model is part number PS18167586. We hope this is what you were looking for!
The warm water side will keep adding water during cycle.
Hello Mike, thank you for reaching out. According to our research, the hot water inlet valve is the likely cause because its internal solenoid has either failed or is stuck open due to mineral buildup. Replacing it might help fix the issue. The part number is PS18188504. We hope this helps!
In this model and make of clothes washers there's an arm that is controled by an electric solenoid that wraps around the shaft at the bottom of the gear assembly looks as if it is either a brake or a shiting arm on the bottom side of the machine and wraps about half way around the tun shaft. This lever or arm is broken on the washer but seems to have enough left to actuate what it is supposed to operate; however, the tub doesn't seem to spin as fast as it should because of the missing portion of tyhe arm.
Hello Michael, thank you for getting in touch. The part you are referring to is the retractor assembly, part number PS18188455. You will need to replace it to fix the issue. The missing portion of this arm prevents the clutch or brake mechanism from fully disengaging. As a result, the machine experiences partial drag on the tub during the spin cycle. This friction limits the spin RPM, leaving clothes excessively wet. We hope this helps.
My Orders
