Quick Question!

Have you ever purchased from PartSelect.com before?

Models > CTA14CCBR

CTA14CCBR Hotpoint Refrigerator - Overview

Get Parts and Repair Help for CTA14CCBR

If you know the refrigerator repair part you need, you can browse the list of all parts on the CTA14CCBR, or you can search by name or part description. You can also find your part by where it is located on the CTA14CCBR by selecting a section below. If you’re not sure which part you need, you can narrow your search by selecting a common symptom and we’ll show you the repair parts most likely to fix your refrigerator. Installation instructions provided by other do-it-yourselfers will help guide you through your repair.

Sections of the CTA14CCBR

[Viewing 3 of 3]
Search for parts
Keep searches simple, eg. "belt" or "pump". Need help?

Package of 12 Screws


Door Shelf Retainer Bar End Cap


Ice Cube Tray

14 Cube.



Comes 12 in a pack.



Size: 10-16 ab. * Part may differ in appearance, but functions same as original. Sold Individually.


Power Cord

This heavy-duty cord has a three-pronged plug (2 electrical, 1 grounding). The power cord supplies power to your refrigerator, allowing it to keep the contents inside cool. There could be an issue with your cord if you notice that the refrigerator will not turn on, or intermittently turns on and off. Check the cord for fraying, or other visible damage. If the power cord shows any signs of damage, replace the cord immediately as it could become an electrical or fire hazard. Before you begin this repair, ensure that the power is disconnected from the unit, and that all food that could ruin is stored away while the power is off.


Condenser Fan Motor

This condenser fan motor operates in a clockwise fashion. The fan itself has two 1/4 inch spade terminals. It carries 2 watts and 115 volts. This motor NO longer comes with cover f...


Twist-In Shelf Support Studs

These support studs are sold in a pair.




Hinge Shim

Search Instructions
Keep searches simple, eg. "belt" or "pump". Need help?

Wouldn't cool

  • Customer: Clarence from Great Cacapon, WV
  • Difficulty: Really Easy
  • Time to Complete: 15 - 30 mins
  • Tools Required: Socket set
  • 16 of 20 people found this instruction helpful
I removed the 3 screws that held the motor and fan. Exchanged fan blades and reinstalled the fan and new motor

I was surprised to find the motor. The refrigerator/freezer was over 28 yrs old. Works fine now read more

Noisy Fan Motor - Bearing went out.

  • Customer: Robert from Carpinteria, CA
  • Difficulty: Easy
  • Time to Complete: 1- 2 hours
  • Tools Required: Nutdriver
  • 10 of 13 people found this instruction helpful
Moving the frig out and cleaning was the hardest part of this job - lots of dust collected over the 17 years the frig was in place. Once all the cleaning was done, with the frig out and back cover off (10 -12 screws taken off with nutdriver),I plugged the frig in and observed the the problem was a noisy fan motor. The motor is at the very back of the frig wi... read more

Refridgerator was running constantly and condesor would get very hot, condesor fan would only turn on if I spun it.

  • Customer: Raymond from Los Lunas, NM
  • Difficulty: Easy
  • Time to Complete: 15 - 30 mins
  • Tools Required: Nutdriver, Socket set
  • 7 of 8 people found this instruction helpful
Unplugged fridge removed the three screws that held fan on to fan frame unplugged condensor fan removed brackets from old fan and put them on new fan installed new fan plugged in fridge and now it works great! read more