EasyApplianceParts is now PartSelect! We've merged our sites to provide a better shopping experience for you.   Full Details

Find Parts

Parts Departments

Top Model Types

Top Brands

Repair Help

Expert Repair Videos

Keep typing for more specific results...

CT9800SH4SS General Electric Wall Oven - Instructions

All Instructions for the CT9800SH4SS
61 - 75 of 100

Search repair tips from other customers using simple keywords like "replace", "fit", "remove", "inspect". DIY doesn't mean you have to do it alone!

Search filter:
Clear Filter
Your search term must have 3 or more characters.
Went well.
2 of 6 people found this instruction helpful.
  • Salih Hindas / from SPRNGFLD GDNS, NY
  • Really Easy
  • 15 - 30 mins
  • Screw drivers
Changed the Temperature Sensor as you suggested, but the problem of 40 minutes to reach a temperature of 375 degrees F. remained the same.
Was this helpful?
Thank you for voting!
No heat
0 of 1 people found this instruction helpful.
  • Edwin from New York, NY
  • Really Easy
  • 15 - 30 mins
  • Screw drivers
Replace the fuses
Was this helpful?
Thank you for voting!
Bulb burned out
2 of 7 people found this instruction helpful.
  • Richard from SPRINGFIELD, MA
  • Really Easy
  • 15 - 30 mins
  • Screw drivers
change bulb
Was this helpful?
Thank you for voting!
Broken Probe Sensor
0 of 1 people found this instruction helpful.
  • Michael from Tucson, AZ
  • Really Easy
  • Less than 15 mins
Replaced it
Was this helpful?
Thank you for voting!
No heat.
0 of 1 people found this instruction helpful.
  • Mack from Jacksonville, FL
  • Really Easy
  • Less than 15 mins
  • Pliers, Screw drivers
Replaced the fuse. Result; did not fix the problem.
Was this helpful?
Thank you for voting!
no night light
4 of 14 people found this instruction helpful.
  • CURTIS from WINDSOR, WI
  • Really Easy
  • Less than 15 mins
  • Screw drivers
took out cover by removing cover. pulled out light bulbs replaced with new bulbs. replaced cover and tighten screw. very easy
Was this helpful?
Thank you for voting!
microwave won't heat
  • Stephanie from Kernersville, NC
  • Really Easy
  • Less than 15 mins
  • Pliers, Screw drivers
bought a fuse but that didn't solve the problem. Guess I need a new microwave
Was this helpful?
Thank you for voting!
Quit working
  • William from Socorro, NM
  • Really Easy
  • Less than 15 mins
  • Pliers, Screw drivers
Just like the directions said. Very simple.
Was this helpful?
Thank you for voting!
Oven Probe broke
  • Kathleen from Munt Laurel, NJ
  • Really Easy
  • Less than 15 mins
Ordered new probe
Was this helpful?
Thank you for voting!
circuit shortage shows, i thing it because i heat on the counter too long cause the thermotart not fumctional.
  • Rong from Portland, OR
  • Really Easy
  • Less than 15 mins
it work ok now
Was this helpful?
Thank you for voting!
missing meat thermistor
  • John R from Asheville, NC
  • Really Easy
  • Less than 15 mins
plug in thermistor when needed
Was this helpful?
Thank you for voting!
Microwave would not heat
  • David from Roanoke, VA
  • Easy
  • Less than 15 mins
  • Screw drivers
I went on line, put in microwave repair and watched a video on repair. I then took the oven down from over the range and took it apart. I could see were the magnetron had burned out. There was a hole with obvious burn marks. I went on line looking for the needed part. I clicked on PartSelect and order the magnetron. I received the part wi thin three days, regular shipping. As I had not put the oven back together it took only a few moments to save 150 to 200+ dollars. I put it back together and happy, happy me, it worked.
Was this helpful?
Thank you for voting!
All power to the microwave went out.
  • Michael from East China Township, MI
  • Easy
  • Less than 15 mins
  • Screw drivers
PartSelect had helpful repair instructions on-line which made the repair easier and faster. Unfortunately, there were other problems with the oven that immediately blew the new fuse I had just installed. It was then determined that additional repair would most likely cost almost as much as a new microwave.
Was this helpful?
Thank you for voting!
Powered Off completely
  • Mohammad from Piscataway, NJ
  • Easy
  • Less than 15 mins
  • Screw drivers
After reading reviews that there was no power what so ever and a fuse replacement will solve the problem, I tried it. Replacing the fuse is very easy (and I am not handy at all). All you have to do is remove the microwave cover from the top by removing two screws, slide the cover to the left and pulling the cover off. Then remove the g rill in front of you, by removing one or two screws. The fuse is in front of you, use pliers and be firm but gentle. Replacing the fuse is easy but it did not solve my problem.
Was this helpful?
Thank you for voting!
Microwave would turn on ,BUT turn table would not turn and oven would not heat.
  • Earl from New Philidelphia, OH
  • Easy
  • 15 - 30 mins
  • Screw drivers
Took off cover , unpluged switches , took off switch assy, off/on test hooped and howlered for about 5 mins .Then laughed about other sites said could get those switches. Just wanted to say I LOVE Partselect. Super fast del , great price. JUST AWSOME!!!!!!!!!!!!!!!!!!!!!!!!!!!!
Was this helpful?
Thank you for voting!
All Instructions for the CT9800SH4SS
61 - 75 of 100