Models > CSG7000CAE

CSG7000CAE Maytag Cooktop - Overview

Sections of the CSG7000CAE

[Viewing 3 of 3]
Keep searches simple, eg. "belt" or "pump".
Sealed Burner Cap with Electrode – Part Number: WP3412D024-26
Sealed Burner Cap with Electrode
★★★★★
★★★★★
(6)
PartSelect #: PS11741733
Manufacturer #: WP3412D024-26
This burner cap assembly is sold with the spark electrode igniter and has a 7-inch outer diameter. This manufacturer-approved surface burner is for gas ranges. The surface burner supplies the heat to ...
$63.34
  In Stock
Order within the next 10 hrs and your part ships today!
Screw – Part Number: W11233072
Screw
★★★★★
★★★★★
(6)
PartSelect #: PS12349731
Manufacturer #: W11233072
This is a multi-use and multi-appliance screw. It can be used on a microwave, refrigerator, range/oven, air conditioner, dehumidifier, washer, or dryer. The measurements of this screw are 8 x 1/2 inch...
$17.00
  In Stock
Order within the next 10 hrs and your part ships today!
Spark Module - Surface Burners – Part Number: 12001596
Spark Module - Surface Burners
★★★★★
★★★★★
(9)
PartSelect #: PS2003170
Manufacturer #: 12001596
This part may differ in appearance, but functions same as original part. : This part sends enough current to the igniter to create a spark to the bottom of the burner cap.
$59.34
  In Stock
Order within the next 10 hrs and your part ships today!
Surface Burner Knob – Part Number: WP74001300
Surface Burner Knob
PartSelect #: PS11743976
Manufacturer #: WP74001300
Sold individually. This knob accepts a D-shaped shaft.
$19.69
  In Stock
Order within the next 10 hrs and your part ships today!
Single Burner Grate – Part Number: 74003165
Single Burner Grate
PartSelect #: PS2081326
Manufacturer #: 74003165
Dark gray in color.   No Longer Available
Igniter Wire – Part Number: 5111A360-60
Igniter Wire
PartSelect #: PS2046712
Manufacturer #: 5111A360-60
This igniter wire is twenty-eight inches long.   No Longer Available
Screw – Part Number: WPW10253196
Screw
PartSelect #: PS11751203
Manufacturer #: WPW10253196
Sold individually. This screw is half of an inch long. It is made of metal and it is intended for use with some Maytag brand ranges.
$3.96
  In Stock
Order within the next 10 hrs and your part ships today!
Seal Tape – Part Number: 12400041
Seal Tape
PartSelect #: PS1573896
Manufacturer #: 12400041
This piece of adhesive seal tape is eighty-nine inches long. It is made of black rubber and has a white backing that peels off easily. This seal tape is designed to fit around the drip pans of your appliance.   No Longer Available
Burner Switch – Part Number: WP7403P367-60
Burner Switch
PartSelect #: PS11744495
Manufacturer #: WP7403P367-60
Order quantity required.
$66.82
  In Stock
Order within the next 10 hrs and your part ships today!
REGULATOR – Part Number: W11170853
REGULATOR
PartSelect #: PS12348157
Manufacturer #: W11170853
$175.32
  In Stock
Order within the next 10 hrs and your part ships today!

Questions And Answers for CSG7000CAE

We're sorry, but our Q&A experts are temporarily unavailable.
Please check back later if you still haven't found the answer you need.

Common Symptoms of the CSG7000CAE

[Viewing 4 of 4]
Will Not Start
Fixed by
these parts
Show All
Gas igniter glows, but will not light
Fixed by
these parts
Show All
Element will not heat
Fixed by
these parts
Show All
Gas smell
Fixed by
these parts
Show All
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
A burner wouldn't spark strongly enough to light the gas.
Replacement of these burners is very easy. You just twist the burner counterclockwise a quarter turn and pull it out. (You may need a big wrench if the range is very old.) Once out, just pull the two wires off and push them onto the new burner. Crimp them on with pliers if they're loose -- mine were. Twist the burner back on.
If the gasket under the burner has disintegrated, don't worry about it. They don't offer replacements for them because they're not necessary as a safety feature. They were designed to keep overspills from running under the cooktop, but the ridge around the hole is likely higher than you'd ever need.
Parts Used:
Sealed Burner Cap with Electrode
  • Matthew from Brookfield, MA
  • Difficulty Level:
    Really Easy
  • Total Repair Time:
    Less than 15 mins
  • Tools:
    Pliers
163 of 178 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Burner Was Worn Out
Burner head arrived when I got home from work. Just timely to cook for dinner that monday night, got the 4 burners disconnect the element from the old burner, then connect element to the new bunners, in less than 10 mins, and I had save estimate $600 buying a brand new stove or gas range, this will last me another5 to 10 years. Especially this time of recession
Parts Used:
Sealed Burner Cap with Electrode
  • arnold from la punte, CA
  • Difficulty Level:
    Really Easy
  • Total Repair Time:
    Less than 15 mins
  • Tools:
    Screw drivers
30 of 31 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
No spark at top burners, first one then eventually all 4.
Most of the repair time was spent researching the problem online, locating the spark module inside the range, and selecting the part online. Installation was easy. Key troubleshooting info for me was, if there is no clicking, the spark unit is probably worn-out. I traced the ignition wires from the burners down to the spark module, located inside a 2x3" metal housing next to the bottom drawer. I removed 2 screws and out it came. The replacement unit pictured on the PartSelect site was not identical to the original but had the same number of contacts. I ordered the part and it arrived a few days later. The old connectors slipped easily onto the new pins, and I screwed the new unit into the range using the new metal housing. All 4 burners now spark up quickly, and we saved at least $100 on a service call. It was well worth the time and effort -- thanks!
Parts Used:
Spark Module - Surface Burners
  • jonathan from Bryson City, NC
  • Difficulty Level:
    Really Easy
  • Total Repair Time:
    15 - 30 mins
  • Tools:
    Screw drivers
29 of 34 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!