My Orders
CS30 - Overview
Models starting with CS30
Click on the best match to narrow your results.
- CS30 (RY30021A) Ryobi Trimmer (String Trimmer)
- CS30 (RY30000A) Ryobi Trimmer (String Trimmer)
- CS30 (RY30000) Ryobi Trimmer (String Trimmer)
- CS30 (RY26500) Ryobi Trimmer (17" Curved Shaft Trimmer)
- CS30 Lynx Grill (BBQ)
- CS300 (Type 1) Black and Decker Circular Saw (7-1/4 Circular Saw)
- CS300 Shimano Baitcast Reels (Corsair Round Baitcasting Reel)
- CS300A Shimano Baitcast Reels (Corsair Round Baitcasting Reel)
- CS300R (Type ALL) Black and Decker Circular Saw (7 1/4 Cir Saw 11am)
- CS3012 Homelite Chainsaw (Homelite Chainsaw Model CS3012 Parts)
- CS3012 (UT-10738-R) Homelite Chainsaw (Chainsaw)
- CS30Y Metabo HPT Chainsaw (Chain Saw Cs 30y)
Enter a part description. DIY Heroes keep it simple, eg. "belt" or "pump".
Search filter:
Clear Filter
Your search term must have 3 or more characters.
No Longer Available
Fuel Tank With Cap
Part #308181004
The Fuel Tank is an OEM replacement part.
It is compatible with the models shown below.
It includes the fuel lines, fuel cap and fuel filter.
If you need to order the fuel tank bumpers, they are sold individually as part number 98792.
No Longer Available
Bump Knob
Part #308042002
This spool retainer is sourced from the equipment manufacturer for use in trimmers. It is a plastic knob, measuring 2 inches in diameter, with a threaded metal bolt in the center. The retainer has a right hand thread, and it is used to secure the spool within the trimmer head to prevent it from coming loose during operation. The retainer ...Read moreengages with the trimmer head to lock the spool in place, while it also advances the cutting line for greater cutting efficiency. If the threads on the retainer bolt wear out or the plastic body becomes damaged, the retainer will be unable to engage with the trimmer head, causing the line to tangle, the spool to come loose, and lowering the cutting performance of the trimmer. Remove the trimmer head cover and detach the retainer from the assembly. Position the new spool retainer in the assembly and thread it firmly into place.
Read less
No Longer Available
Grass Deflector Assembly
Part #T308744001
This grass deflector acts like a shield so that grass clippings are directed away from you and the surrounding areas while you are operating your trimmer. It is often located near the bottom of your trimmer, close to the cutting head. This assembly also includes the line cutting blade, which maintains the proper length of the trimmer line...Read more. If the assembly is cracked, bent, or missing, grass clippings may fly in unintended directions. This can be dangerous if your trimmer throws debris towards you or others nearby, so it is important to replace the damaged deflector. To replace the assembly, you will need a screwdriver to remove the flat washer, wing nut and, the hex screw from the grass deflector. Please be aware that this OEM grass deflector is sold individually.
Read less
No Longer Available
Curved Shaft Assembly
Part #308038010
This is a Genuine OEM sourced replacement part designed for use with Ryobi String Trimmers and Brushcutters. This item is made out of Metal and it is Sold Individually. It is the Lower Shaft that the Cutting Head is attached to. • The attachment connects to the power head by means of a coupler device. • Loosen the knob on the coupler...Read more of the power head shaft and remove the end cap from the attachment. • Push in the button located on the attachment shaft. • Align the button with the guide recess on the power head coupler and slide the two shafts together. • Rotate the attachment shaft until the button locks into the positioning hole. NOTE: If the button does not release completely in the positioning hole, the shafts are not locked into place. Slightly rotate from side to side until the button is locked into place. • Tighten the knob securely.
Read less
$6.40
In Stock
Spring
Part #638033001
This OEM spring, also known as a recoil or rewind spring, is housed in a container and is used to retract the starter rope on various lawn equipment models. Over time and through use, the spring will eventually lose its tension, and will break. If your starter rope has no resistance when pulling it, the starter spring is likely broken. Me...Read moreasuring at approx. 3-inches by 3-inches, this spring is suitable for use with a variety of lawn equipment models and is sold individually.
Read less
$6.40
In Stock
PRIMER BULB
Part #561635001
This is a genuine Ruixing replacement part, it is sold individually. By pressing the bulb, it will purge the carburetor of air. Fuel will be forced up from the fuel tank through the fuel line then into the carburetor. Then the excess fuel will be forced back into the fuel tank through the fuel return line. At some time the primer will l...Read moreose its elasticity or crack and need to be replaced. We have an article and video on How to Replace a Primer Bulb, in our Repair Center. That can be found on the front page of our site.
Read less
No Longer Available
Grommet
Part #98792
This is a genuine OEM replacement part, sold individually. This Bumper helps keep the fuel tank in place, and minimizes vibration of the fuel tank. This part is used with a variety of string trimmers, compatible with the models listed below.
$40.31
Special Order
Carburetor
Part #308054013
This carburetor assembly in your lawn equipment mixes air and fuel to create a combustible mixture for the engine. A broken carburetor assembly can cause engine issues like running too lean or too rich, sputtering, stalling, fuel leaks, or a strong fuel odor. It is crucial to replace a faulty carburetor assembly promptly to avoid safety h...Read moreazards from fuel leaks and prevent engine failure due to fuel flooding. Replacing the carburetor requires a socket set. To replace the carburetor, use a socket set to remove the screws on the air filter base and disconnect the fuel lines before lifting it out of your machine. This OEM-verified assembly is sold separately from its fasteners.
Read less
No Longer Available
Hanger Cap
Part #518019002
No Longer Available
Air Box Cover
Part #518777001
This is a genuine OEM approved replacement part designed for use with Ryobi trimmers and pruners. The purpose of an air box cover is to secure and protect an air filter. It is made out of black plastic and it is sold individually. This cover snaps into slots of the housing, no tools are needed to replace this cover.
No Longer Available
Fuel Tank Assembly
Part #308675051
This genuine fuel tank and cap assembly is found in your trimmer. The fuel tank holds the gasoline needed for your machine, while the cap seals it to prevent leaks and evaporation. It also prevents dirt and debris from getting into the engine and causing costly damage to it in the long run. You can usually find this assembly at the rear o...Read morer top of your trimmer, near the engine or handle. If the cap does not seal the tank properly and fuel spills from the assembly, it may be broken. A faulty cap can let debris or moisture into the tank, leading to contamination and engine issues. If the tank is damaged and can not hold enough fuel, your machine will have reduced runtime and require frequent refueling. To replace a damaged assembly, you will need a wrench or screwdriver to remove any bolts, clips, or screws holding the assembly in place. Be prepared to catch any fuel spillage with a container. Slide off any retaining clips or use pliers to release any clamps along the fuel lines before slowly pulling the assembly off your machine. These replacement parts are sourced directly from the original equipment manufacturer. This fuel tank and cap assembly also includes the fuel lines and the filter.
Read less
$6.40
In Stock
Spring
Part #06713
Springs are used within outdoor power equipment to provide tension and shock absorption, depending on their application and use. This spring is designed for use within trimmers/brush cutters and is made to provide tension on the spool reel mechanism, and in some cases may be used to advance the line whenever portions of it are cut off. Th...Read moreis spring measures approximately 1.3-inches in length when extended and comes as an individual part. If you notice the line/spool in your trimmer is not advancing or is coming too quickly, the spring may be damaged and need replacing. Since this spring is a high-use part, it is not uncommon for it to lose tension over time and need to be replaced. To replace the spring, you will need to unscrew the covering cap, remove the spool feeding reel, remove the old spring and install the new spring with the rest of the assembly. Make sure to feed the line back into the appropriate feeding holes prior to operation of the trimmer.
Read less
Watch our pros, then fix it yourself.
See how others fixed this model. Time, tools, difficulty, and steps that lead to victory!
View More
Search repair tips from other customers using simple keywords like "replace", "fit", "remove", "inspect". DIY doesn't mean you have to do it alone!
Search filter:
Clear Filter
Your search term must have 3 or more characters.
fuel line leaks
15 of 35 people
found this instruction helpful.
As others have said , simply remove old tank and tubes and replace in reverse order., being sure tube from filter goes to primer bulb.
Other Parts Used:
Was this helpful?
Thank you for voting!