Models > CR1100KW

CR1100KW Crosley Microwave - Overview

Sections of the CR1100KW

[Viewing 5 of 5]
Keep searches simple, eg. "belt" or "pump".
Screw, 8/18 x 3/8 – Part Number: WP90767
Screw, 8/18 x 3/8
★★★★★
★★★★★
(2)
PartSelect #: PS11746840
Manufacturer #: WP90767
This screw is sold individually.
$5.69
  In Stock
Ceramic Fuse - 20 amp – Part Number: WPM0805101
Ceramic Fuse - 20 amp
★★★★★
★★★★★
(3)
PartSelect #: PS11747931
Manufacturer #: WPM0805101
This microwave fuse is just over an inch in length. It has a white ceramic center, and metal on either end. This is a twenty amp 250-volt fuse, and is used to power your microwave. If your microwave w...
$11.08
  In Stock
Light Bulb - 120v 25w – Part Number: WPA3167501
Light Bulb - 120v 25w
★★★★★
★★★★★
(2)
PartSelect #: PS11747808
Manufacturer #: WPA3167501
This is a 120 volt, 25-watt light bulb that fits a variety of medium to large kitchen appliances. It functions by illuminating when the appliance door is open. It has a small base with a twist lock. T...
$33.98
  In Stock
Turntable Tray - White – Part Number: 51001121
Turntable Tray - White
PartSelect #: PS2046592
Manufacturer #: 51001121
This tray rotates in your microwave ensuring more even temperatures.   No Longer Available
Turntable Gear – Part Number: Y02450002
Turntable Gear
PartSelect #: PS2191412
Manufacturer #: Y02450002
This turntable gear is less than an inch in diameter. It is made of plastic and is used for some microwaves.
$26.45
  On Order
SUPPORT, ROLLER – Part Number: Y02100186
SUPPORT, ROLLER
PartSelect #: PS2191263
Manufacturer #: Y02100186
This turntable roller support is less than an inch long. It is made of plastic and is used for some microwaves.   No Longer Available
Clip – Part Number: Y03110050
Clip
PartSelect #: PS2193424
Manufacturer #: Y03110050
  No Longer Available
Turntable Roller – Part Number: 02210011
Turntable Roller
PartSelect #: PS14460
Manufacturer #: 02210011
This turntable roller is less than an inch long. It is made of plastic and is used for some microwaves.   No Longer Available
PIN, PIVOT – Part Number: Y03070041
PIN, PIVOT
PartSelect #: PS2192607
Manufacturer #: Y03070041
This pivot pin is just under an inch long. It is made of plastic and is used for many ranges and microwaves.   No Longer Available
Rack Support – Part Number: 02010031
Rack Support
PartSelect #: PS14280
Manufacturer #: 02010031
This microwave support is white in color and less than an inch long. It is made of plastic, and it helps to support the metal rack in your microwave.   No Longer Available

Questions And Answers for CR1100KW

We're sorry, but our Q&A experts are temporarily unavailable.
Please check back later if you still haven't found the answer you need.

Common Symptoms of the CR1100KW

[Viewing 1 of 1]
Won’t turn on
Fixed by
these parts
Show All
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
microwave oven blew fuse
First I removed upper front grill by removing two Philips head screws on top and pulling off. This exposed the Philips head screw which holds control panel in place. After removing screw I pushed up on panel and it came off to expose fuse. With needle nose pliers I removed old fuse and again with pliers held new fuse in position. With the help of a bladed screwdriver, I pushed new fuse into holder, then replaced panel, screw and grill. This took less than 15 minutes even as one of the wires on control panel pulled out of connection and took some time to locate where to reconnect, otherwise was an easy fix
.
Parts Used:
Ceramic Fuse - 20 amp
  • tad from tamarack, MN
  • Difficulty Level:
    Really Easy
  • Total Repair Time:
    Less than 15 mins
  • Tools:
    Pliers, Screw drivers
22 of 30 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
microve stopped working
Jenn-Air Microwave would not turn on. Clock worked , light worked, timer worked and would count down .I changed' Part #0813140 Switch, Micr} cost $8.99 plus shippingNow it works Thank You for good advise
Parts Used:
Ceramic Fuse - 20 amp
  • Denice from Montgomery, AL
  • Difficulty Level:
    Really Easy
  • Total Repair Time:
    15 - 30 mins
11 of 17 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Microwave went pop and nothing would work.
I mistakenly thought I had to remove the microwave to get to the back, not so. I would have had access to what I needed to unscrew; but I have to admit the hassle of taking it down and putting it back equals having to work on it attached to the shelf-your call on how you do this. I unscrewed the front top to remove the vent piece that is across the top front of the microwave. This will reveal the control panel screw. (While you have the vent removed you might want to clean the vent and the exposed filter.) carefully lift and pull out control panel. I unplugged a piece as the wires were tied tight. It will not completely detach, so carefully tip it back from exposed insides. The fuse is not clear but white with silver ends so look in upper right for it. I popped it out and replaced it. Replugged the wired part to cover and carefully fit tabs in and slide down to secre. Replace screw, replace vent piece and secure screws on top of microwave. I plugged it in to test before putting it back above my stove.
Parts Used:
Ceramic Fuse - 20 amp
  • Deborah from STRUM, WI
  • Difficulty Level:
    Easy
  • Total Repair Time:
    30 - 60 mins
  • Tools:
    Screw drivers
6 of 6 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!