Models > CPMO227NUFA

CPMO227NUFA Frigidaire Microwave - Overview

Sections of the CPMO227NUFA

[Viewing 4 of 4]
Keep searches simple, eg. "belt" or "pump".
FUSE – Part Number: 5304509451
FUSE
★★★★★
★★★★★
(8)
PartSelect #: PS12071294
Manufacturer #: 5304509451
This fuse, also known as a cartridge fuse, is a genuine OEM replacement part for microwaves. It has a glass cylindrical body with a metal cap on each end. The cap connects the fuse to the circuit. If ...
$13.12
  In Stock
COVER – Part Number: 5304505675
COVER
★★★★★
★★★★★
(1)
PartSelect #: PS11766161
Manufacturer #: 5304505675
$11.25
  In Stock
LATCH ASSEMBLY – Part Number: 5304519330
LATCH ASSEMBLY
PartSelect #: PS12705724
Manufacturer #: 5304519330
$10.11
  In Stock
TRAY – Part Number: 5304519348
TRAY
PartSelect #: PS12705742
Manufacturer #: 5304519348
$168.99
  In Stock
RING ASSEMBLY – Part Number: 5304519347
RING ASSEMBLY
PartSelect #: PS12705741
Manufacturer #: 5304519347
$29.32
  Special Order
SPRING – Part Number: 5304519324
SPRING
PartSelect #: PS12705718
Manufacturer #: 5304519324
$6.80
  Special Order
THERMOSTAT – Part Number: 5304519340
THERMOSTAT
PartSelect #: PS12705734
Manufacturer #: 5304519340
$14.27
  On Order
SWITCH – Part Number: 5304512529
SWITCH
PartSelect #: PS12365114
Manufacturer #: 5304512529
$40.50
  In Stock
DIODE – Part Number: 5304513459
DIODE
PartSelect #: PS12365445
Manufacturer #: 5304513459
$24.23
  In Stock
MAGNETRON – Part Number: 5304519335
MAGNETRON
PartSelect #: PS12705729
Manufacturer #: 5304519335
$228.71
  In Stock
COUPLER – Part Number: 5304519346
COUPLER
PartSelect #: PS12705740
Manufacturer #: 5304519346
$9.26
  In Stock
BRACKET – Part Number: 5304519341
BRACKET
PartSelect #: PS12705735
Manufacturer #: 5304519341
$21.85
  In Stock

Questions And Answers for CPMO227NUFA

Be the first to ask our experts a question about this model!

Common Symptoms of the CPMO227NUFA

[Viewing 1 of 1]
Won’t turn on
Fixed by
these parts
Fixing
Show All
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Lcd display died .
First problem was there are a lot of different enclosures for NUFA models. After much research, I found a video of a smaller countertop micro that had the same screw pattern as my large Gallery over the stove unit. For my micro, you remove the screws on the back, one screw on the left side, and the entire cover lifts off. I then discharged the capacitor using a pair of insulated needle nosed pliers, and took a picture so I could replug everything correctly. Then removed all of the connectors and one screw holding the board in place, and removed the old board. After that, I just did everything in reverse, and plugged it in. Voila! I was finished. It was a very simple job once I found how to access the control board. Hope this helps, and my thanks for the prompt parts delivery.
Don Crow
Parts Used:
CONTROL PANEL
  • Donald from BROWNSVILLE, TX
  • Difficulty Level:
    A Bit Difficult
  • Total Repair Time:
    30 - 60 mins
  • Tools:
    Screw drivers
2 of 2 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!