CPMO209KFB Frigidaire Microwave - Overview
Sections of the CPMO209KFB
[Viewing 4 of 4]Keep searches simple, eg. "belt" or "pump".
SWITCH
PartSelect #: PS8769124
Manufacturer #: 5304493153
The relay switch may also be known as the door micro switch and is a part for your microwave. The function of this part is to monitor the door latch and communicate whether the door latch is open or c...
$68.86
In Stock
TURNTABLE TRAY
PartSelect #: PS16620620
Manufacturer #: 5304529482
We understand how important it is for your appliances to work reliably and safely. When it comes to your GE appliances, our GE Door Switch Assembly is just what you need. This switch assembly is much...
$78.36
In Stock
Door Open Lever
PartSelect #: PS3506555
Manufacturer #: 5304485407
This door release lever, also known as a door open lever, is an original manufacturer replacement for microwave/oven combos. When the door release button is pressed, the lever releases the door latch,...
$55.29
In Stock
Wave Guide Cover
PartSelect #: PS1993100
Manufacturer #: 5304462314
This microwave waveguide cover is a protective mica panel that shields the internal components of the microwave—especially the magnetron—from moisture, grease, and food splatter during cooking. It hel...
$59.47
In Stock
Turntable Roller Guide
PartSelect #: PS2343051
Manufacturer #: 5304467717
The roller guide sits underneath the glass turntable tray in your microwave. If your microwave turntable tray is not rotating properly, you may need to replace the turntable roller guide. The function...
$85.12
Special Order
Door Latch Spring
PartSelect #: PS979582
Manufacturer #: 5304440316
The microwave door latch spring creates tension, and engages the door latch when the door is closed. This spring is made completely of metal, and is approximately 1 inch long. If your microwave door w...
$53.20
In Stock
MAGNETRON
PartSelect #: PS12728994
Manufacturer #: 5304521745
Revitalize your Frigidaire wall oven with this genuine OEM MAGNETRON. This key component produces the microwaves that effectively cook food in your microwave oven. With its signature quality, this MAG...
$155.17
In Stock
Manuals & Care Guides for CPMO209KFB
Click to downloadInstall
Installation Instructions
(2.88MB)
Manual
Owner's Manuals
(0.88MB)
Manual
Owner's Manuals
(8.93MB)
Wiring
Wiring Diagram
(0.62MB)
Questions And Answers for CPMO209KFB
Be the first to ask our experts a question about this model!
✖
Ask a Question
Ask our experts a question on this model and we'll respond as soon as we can.
Sorry, we couldn't find a match for "".
Here's a guide for finding your model number.
Something went wrong. Please try again later.
Your Question Has Been Submitted!
Our experts will send you an email as soon as your question has been answered.
Common Symptoms of the CPMO209KFB
[Viewing 6 of 6]No heat
Fixed by
these parts
these parts
Show All
Won’t turn on
Fixed by
these parts
these parts
Show All
Door stuck closed
Fixed by
these parts
these parts
Show All
Door not closing properly
Fixed by
these parts
these parts
Show All
Noisy
Fixed by
these parts
these parts
Show All
Tray won’t turn
Fixed by
these parts
these parts
Show All
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Timer would run but the microwave won't start
I first removed the top plate above the microwave door (3 screws), then I removed the plate containing the buttons and clock. The microwave has 3 relay switches and they are in a little holder. The holder was too difficult to remove so I just removed the bottom switch and replaced. The microwave started right up.
Parts Used:
-
Tim from Chicago, IL
-
Difficulty Level:Easy
-
Total Repair Time:30 - 60 mins
-
Tools:Screw drivers
91 of 149 people
found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
microwave wouldn't turn on but timer worked.
was told buy a repair person to check the door micro switches as it was a common problem. removed the top plastic air grill to get access to the screw that holds in place the control cover. After unplugging the unit, i took out the (2) screws that held in the switches and removed them (3). One switch was a bit melted so i tested it with a
... Read more
12 volt battery and it was bad. Ordered a new one from Part select and got it fast . Works great .
Read less
Parts Used:
-
Steve from Moorhead, MN
-
Difficulty Level:Easy
-
Total Repair Time:Less than 15 mins
-
Tools:Pliers, Screw drivers
35 of 64 people
found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Microwave would count down but not run
After unplugging the unit remove the control face buy removing the screws. All three door switchs are on a bracket on the left. Remove the two screws holding the bracket in place and pull out. Disconnect the wires from the three switches and test each switch indivually to determine the bad one. I used a multimeter set on ohms.Replace the
... Read more
bad switch with the new one and replace all the wires. Reassemble the unit and you are good to go.
Read less
Parts Used:
-
Betty from Kimball, TN
-
Difficulty Level:Easy
-
Total Repair Time:15 - 30 mins
-
Tools:Pliers, Screw drivers
29 of 49 people
found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!