CMXGKAME29A (Type 0) Craftsman Edger - Overview

The fuel tank assembly is responsible for storing and supplying fuel to the engine in lawn and outdoor power equipment. It includes the tank, fuel cap, and fuel lines. The fuel tank assembly will fail if the tank develops cracks or leaks, or if the fuel lines can become clogged. When the fuel tank assembly fails, you will notice fuel leak...Read moreage, restricted fuel supply, stalling, difficulties starting and overall lower performance. Before beginning any repairs, first drain any remaining fuel from the tank for your safety. Disconnect the fuel lines from the tank and remove the fuel tank from the equipment. Position the new tank on to the mounting holes and secure it in place. Connect the fuel lines to the engine and vent to complete your repair.

This foam air filter in your lawn equipment serves as a protective barrier, preventing dirt, dust, and debris from entering the combustion chamber. Clean air is crucial for efficient fuel combustion. Typically located in the air intake system, a dirty, damaged, or torn air filter indicates the need for replacement. If you have trouble sta...Read morerting, reduced power, or rough operation, it may be due to a compromised air filter. To replace the air filter, unscrew the knob on the housing cover, swing it out, and remove the old filter. Consult the user guide for installation instructions. Before adding this to your cart, please be aware that this OEM replacement part is sold individually.

Designed for use in various models of lawn and garden equipment, this part is not sold as part of a kit or assembly. It is made of metal, is gold in color, and is sold individually. This part may also be called a Flange Lock. This nut is designed to lock in place, preventing vibrations and other parts coming loose. This nut may be locate...Read mored in multiple locations on your machine, refer to your owners manual to determine if this is the correct part. You will need a wrench or socket set and a torque wrench to complete this repair. You should only torque the nut to the manufacturer recommendation, no tighter. You will need to replace this part when it is worn or damaged. While this part can wear through regular use, it is most commonly damaged through improper use of a wrench or socket. Customers describe this repair as Easy.

Also referred to as a Lock Nut or Flange Lock, this nut is designed for use with various lawn and garden equipment. The purpose of this part is to hold parts in place while resisting loosening when properly threaded. It is sold individually, not as part of a kit or assembly. It is black, made of metal, and is found in a variety of locatio...Read morens. Refer to your owners manual to determine if this is the correct part. This part will need to be replaced when it is weak or broken. The symptoms experienced when this part breaks will depend on its location. You will need pliers to complete this repair. Customers rate this repair as Easy.

This is an OEM replacement part and is sold individually. Its propose is to deliver an electric current from an ignition system to the combustion chamber of a gas fueled engine. It will ignite the air fuel mixture by the spark. Spark Plugs will usually have to gapped to the manufactures specifications found in the owners manual. Over tim...Read moree a Spark Plug will become fouled because the air/fuel ratio may be set wrong,worn piston rings, carbon build up and other factors. It is better to replace a fouled spark plug, rather then trying to clean it.

This is an authentic Craftsman replacement part, sourced from the original manufacturer for use with lawn edgers. The special belt is used to link the motor drive shaft and the blade pulley to allow the blade to rotate with the shaft. This item is available as an individual replacement part.

This is a genuine replacement part from original manufacturer. It is compatible with Ryobi, MTD, Troy-Bilt, Yard Man, and Bolens machines. It\\\'s used with a variety of power tools including trimmers, tillers, and blowers. O-rings create a seal between solid parts, retaining pressure. Because many machines use more than one type of O-rin...Read moreg, use care to ensure that the right one is being used in the right spot. This ring is sold individually.

This is a replacement part sourced directly from the manufacturer for Craftsman trimmers and edgers. The fuel cap prevents fuel from spilling out of the fuel tank by covering the opening on the fuel tank. To install the fuel cap requires no tools, simply twits it into place. This part is made of plastic and is sold individually.

This throttle cable is responsible for controlling the engine speed in edgers. It is a manufacturer-approved cable designed with specific end fittings that connect to the throttle control lever on one end and the carburetor on the other. When the throttle control lever is adjusted, the cable transmits the motion to the carburetor, which a...Read morellows the user to regulate the engine speed. Over time, the throttle cable can wear out, fray, or become disconnected, leading to loss of throttle control, lower power output, and engine stalling. To replace the throttle cable, first ensure the engine is off and cool, for your safety. Locate the end fittings on the cable and disconnect them carefully. Remove the fasteners that secure the cable, and then route the new cable along the same path as the old one. Finally, reconnect the end fittings, and adjust the cable tension as necessary.

This is a genuine item that is supplied by the original equipment manufacturer for use with trimmers. The metal clutch goes between the clutch drum and the clutch washer. It helps to spin the cutting head and the flex shaft. It may require a screwdriver and a hammer for installation. This clutch is available as an individual replacement part and comes with a washer.