Models > CM414F

CM414F Crosley Microwave - Overview

Sections of the CM414F

[Viewing 5 of 5]
Keep searches simple, eg. "belt" or "pump".
Screw – Part Number: W11233072
Screw
★★★★★
★★★★★
(6)
PartSelect #: PS12349731
Manufacturer #: W11233072
This is a multi-use and multi-appliance screw. It can be used on a microwave, refrigerator, range/oven, air conditioner, dehumidifier, washer, or dryer. The measurements of this screw are 8 x 1/2 inch...
$14.92
  In Stock
Light Bulb - 120v 25w – Part Number: WPA3167501
Light Bulb - 120v 25w
★★★★★
★★★★★
(2)
PartSelect #: PS11747808
Manufacturer #: WPA3167501
This is a 120 volt, 25-watt light bulb that fits a variety of medium to large kitchen appliances. It functions by illuminating when the appliance door is open. It has a small base with a twist lock. T...
$33.98
  In Stock
Turntable Tray - White – Part Number: 51001145
Turntable Tray - White
PartSelect #: PS1610990
Manufacturer #: 51001145
  No Longer Available
Fuse - 15 Amp 250V – Part Number: WPY01050009
Fuse - 15 Amp 250V
★★★★★
★★★★★
(1)
PartSelect #: PS11757434
Manufacturer #: WPY01050009
$5.69
  In Stock
Turntable Gear – Part Number: Y02450002
Turntable Gear
PartSelect #: PS2191412
Manufacturer #: Y02450002
This turntable gear is less than an inch in diameter. It is made of plastic and is used for some microwaves.
$26.45
  On Order
Burner Mounting Screw – Part Number: 7101P286-60
Burner Mounting Screw
PartSelect #: PS2078761
Manufacturer #: 7101P286-60
This burner mounting screw is used for mounting burners of some ranges. It also comes with a thin black spacer made of hard plastic.
$7.00
  In Stock
SCREW – Part Number: 211000
SCREW
PartSelect #: PS1793131
Manufacturer #: 211000
$11.96
  In Stock
SUPPORT, ROLLER – Part Number: Y02100186
SUPPORT, ROLLER
PartSelect #: PS2191263
Manufacturer #: Y02100186
This turntable roller support is less than an inch long. It is made of plastic and is used for some microwaves.   No Longer Available
Turntable Roller – Part Number: 02210011
Turntable Roller
PartSelect #: PS14460
Manufacturer #: 02210011
This turntable roller is less than an inch long. It is made of plastic and is used for some microwaves.   No Longer Available
PIN, PIVOT – Part Number: Y03070041
PIN, PIVOT
PartSelect #: PS2192607
Manufacturer #: Y03070041
This pivot pin is just under an inch long. It is made of plastic and is used for many ranges and microwaves.   No Longer Available

Questions And Answers for CM414F

We're sorry, but our Q&A experts are temporarily unavailable.
Please check back later if you still haven't found the answer you need.

Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Blown Fuse - Ps1750182
Unscrewed the cover of the microwave replaced the blown fuse with the new fuse, plugged in the microwave and tested all functions and everything worked fine. Thx for quick delivery.
Parts Used:
Fuse - 15 Amp 250V
  • John from Inverness, FL
  • Difficulty Level:
    Really Easy
  • Total Repair Time:
    Less than 15 mins
  • Tools:
    Screw drivers
9 of 11 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
no power at all
unscrew microwave's cover,test the fuse which is located at top rear left side, the fuse is inside a plastic tube,if the fuse is burnout,just replace it.
Parts Used:
Fuse - 15 Amp 250V
  • patricio from chicago, IL
  • Difficulty Level:
    Easy
  • Total Repair Time:
    Less than 15 mins
  • Tools:
    Nutdriver, Screw drivers
6 of 11 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Light Bulb
Using a flat-head screw driver, I removed the 1 screw from the small "door" on the back, upper right corner. Once the screw was removed, it allowed the door plate to "pop" open; exposing the old bulb. I removed the old bulb; replaced it with the new one. DONE!
Parts Used:
Light Bulb - 120v 25w
  • Terri from Kingsland, TX
  • Difficulty Level:
    Easy
  • Total Repair Time:
    Less than 15 mins
  • Tools:
    Screw drivers
6 of 11 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!