CH980 (0012) Kohler Engine - Overview

This is a genuine Kohler replacement part that has been sourced from the original manufacturer to be used with small engines. The metal screw is used to secure the head to the top of the cylinder assembly. This screw requires a hex ratchet set to install and is priced as a single item.

Kohler Original Equipment 52 050 02-S Pro Performance Oil Filter. For optimum performance, we recommend changing the oil in your small engine after the first five hours of use. After that, change the oil on a yearly basis or after every 50 hours of use (whichever comes first).

This OEM part is sold individually and is a direct replacement part sourced from the manufacturer. The Woodruff Key is used to allow mating parts such as a shaft and gear to rotate together. It is made of silver-colored metal and is found in various locations, depending on your model. This part will wear over time and needs to be replace...Read mored when damaged, worn, or if the mating parts no longer rotate together. Customers rate this repair as Easy.

This is a high-quality manufacturer-sourced part which is made for use with Kohler engines commonly installed on lawn and garden equipment. It helps to distribute the pressure evenly and provide a tight seal for the valve stem. Over time it may become brittle and begin to crack eventually requiring a replacement. For the proper applicatio...Read moren please refer to the appropriate diagrams of your model. This high-quality part is made of durable rubber material and is sold individually. You will need a screwdriver and a wrench set to take the engine apart and perform the repair.

This stator kit (15 amp) is an OEM part direct from Kohler. Composed of metal, wiring and protective plastic, the kit is made for use with many small engines. This component provides the necessary voltage for charging the motor battery. A wrench and a pair of pliers are helpful for making the installation. Please refer to the manual for additional repair instructions.

This is an original replacement part manufactured for use with Kohler small engines. The flanged hex nut is typically used as a fastener on the governor control assembly. This nut can have multiple uses, please see model diagram for part location and usage. The flanged nut is available as an individual replacement part.

This replacement fuel pump is a genuine OEM supplied item that is commonly utilzed on Kohler engines installed on lawn and garden equipment. It is used to pump the fuel from the tank into the carburetor. Over time it may begin to fail eventually requiring replacement, it is recommended to periodically check for hairline cracks and other d...Read moreamage to the external surfaces of the pump. Please note one durable plastic body fuel pump is included per order.

This is an authentic replacement part manufactured for use with Kohler small engines. The valve springs are used to compress when the valve is open and extend to close the valve. The intake and exhaust valves use this spring, and it is sold individually.

Linkage Bushing

An authentic replacement part which is supplied directly from the original equipment manufacturer for use with Kohler engines commonly installed on lawn and garden equipment. This special knob is used to secure the air cleaner cover which is sold separately. It is a durable plastic component which is sold individually.