CH740-3381 Kohler Engine - Overview

This genuine OEM oil filter helps to remove harmful contaminants from engine oil. It is designed for a variety of Engines. It is sold Individually. This part maintains optimum performance of your engine in accordance with applicable EPA emissions regulations. It is recommended to replace an Oil Filter at least once a season.

This oil seal is a genuine OEM replacement part designed for lawn and garden equipment. It is a small, circular rubber seal with a diameter of 2 3/8 inches, used to prevent oil leakage between the gear cover and gear shaft, and prevent the entry of contaminants. You will need to replace this oil seal if it is brittle, cracked, or has lost...Read more elasticity. A faulty seal will cause the gears to lose lubrication, increase friction damage, and prematurely wear down the parts. Remember to drain the oil from your equipment before beginning any repairs. Carefully pry the old seal from its mounting position and clear off any debris and residue on the area. Place the new seal in position and ensure it is securely fitted.

This OEM part is sold individually and is a direct replacement part sourced from the manufacturer. The Woodruff Key is used to allow mating parts such as a shaft and gear to rotate together. It is made of silver-colored metal and is found in various locations, depending on your model. This part will wear over time and needs to be replace...Read mored when damaged, worn, or if the mating parts no longer rotate together. Customers rate this repair as Easy.

The breather hose acts as a valve for the fuel tank, it allows for the air to enter the fuel tank but it won't allow fuel or fuel emissions to leave the tank. It is an identical replacement for a worn, damaged or a missing component that was installed on a new unit. This is a genuine OEM sourced replacement part which is designed for use ...Read morewith Kohler engines that are commonly installed on a variety of lawn and garden equipment. It is made of high-quality rubber material and is sold individually. Check the diagrams for your model to ensure the correct repair procedure.

This is a high-quality manufacturer-sourced part which is made for use with Kohler engines commonly installed on lawn and garden equipment. It helps to distribute the pressure evenly and provide a tight seal for the valve stem. Over time it may become brittle and begin to crack eventually requiring a replacement. For the proper applicatio...Read moren please refer to the appropriate diagrams of your model. This high-quality part is made of durable rubber material and is sold individually. You will need a screwdriver and a wrench set to take the engine apart and perform the repair.

The breather filter connects to the breather gasket. It is a genuine OEM sourced part which is specially designed for use with Kohler engines. This filter is available as an individual replacement part. A wrench may be needed during the installation of this filter.

It is an OEM item that is made for use with Kohler engines commonly installed on a variety of lawn and garden equipment. This is the valve that the push rod ride inside of which will push the exhaust valve open during the exhaust stroke. A bent push rod or a damaged lifter-valve can not only affect your engine\\\'s performance, they can s...Read moreeriously damage other parts if the problem is not taken care of immediately. This is a high-quality replacement for a missing or a damaged component that was installed on a new unit. To ensure the correct location and installation of this item, refer to the diagrams of your specific model. Note, one durable metal lifter-valve and a tube of lube are included. You will need a screwdriver and a wrench set to take apart the engine when performing this repair.

This is an original replacement part manufactured for use with Kohler small engines. The flanged hex nut is typically used as a fastener on the governor control assembly. This nut can have multiple uses, please see model diagram for part location and usage. The flanged nut is available as an individual replacement part.

This replacement fuel pump is a genuine OEM supplied item that is commonly utilzed on Kohler engines installed on lawn and garden equipment. It is used to pump the fuel from the tank into the carburetor. Over time it may begin to fail eventually requiring replacement, it is recommended to periodically check for hairline cracks and other d...Read moreamage to the external surfaces of the pump. Please note one durable plastic body fuel pump is included per order.

A genuine item that is supplied directly from the original equipment manufacturer for use with Kohler engines commonly installed on lawn and garden equipment. It is an identical replacement for a faulty or missing fan which was originally installed on the new unit, please refer to the appropriate diagrams of your model for the correct loc...Read moreation and application of this component. This high-quality part is made of durable black plastic and is sold individually, keep in mind the hardware to secure it is sold separately.

This is an authentic replacement part manufactured for use with Kohler small engines. The valve springs are used to compress when the valve is open and extend to close the valve. The intake and exhaust valves use this spring, and it is sold individually.