This primary air filter element in your lawn equipment filters the air that enters the engine for combustion. It is a cylindrical-shaped filter made of pleated paper and is typically located within the air cleaner housing secured by an end cap. The filter element has an inner safety element that provides an extra layer of protection. It m...Read moreeasures 10 1/2 inches in length with an outer diameter of 4 1/8 inches and an inner diameter of 2 1/2 inches. To determine if the filter element needs to be replaced check for visible signs of damage or excessive dirt buildup. A damaged or clogged element restricts airflow and allows dirt and debris to enter the engine resulting in reduced performance. To replace the filter element unhook the retaining clips and detach the end caps of your air cleaner housing from the machine. Remove the old element from the housing and insert the new one. Refer to your user manual for any specific installation instructions. Please note that this OEM-sourced filter element is sold individually and separately from the safety air filter element.
It is a genuine manufacturer-sourced replacement screw which is produced for use with Kohler engines commonly installed on lawn and garden equipment. This part has multiple applications depending on the model of your unit, please make sure to check appropriate diagrams for the correct location and use of this hardware. Over time the threa...Read moreds may wear out or the part may simply get lost eventually requiring a replacement. It is a high-quality hex head screw which is sold individually.
This rubber dust ejector valve is an OEM replacement component used in engine air cleaner housings to automatically expel dirt and debris from the intake system. Made from flexible rubber, it opens under airflow to release dust while maintaining a proper seal during operation, helping prevent air filter clogging and supporting clean airfl...Read moreow. It is an ideal replacement when a hardened, cracked, or missing valve reduces air cleaner efficiency or allows debris buildup that can affect engine performance.
This is an authentic Kohler replacement part, sourced from the original manufacturer for use with small engines. This special screw has different applications like securing throttle lever and stop cable clamp. This screw is available as an individual replacement part, please see model diagram for part location and usage.