Switch to Classic
Models > CGLW821K

CGLW821K Crosley Cooktop - Overview

Sections of the CGLW821K

[Viewing 2 of 2]
Keep searches simple, eg. "belt" or "pump".
Burner Grate – Part Number: WP2003X030-00
Burner Grate
PartSelect #: PS11738737
Manufacturer #: WP2003X030-00
This square burner grate has sides measuring almost nine inches long. It is all black in color. Sold individually.
$107.76
  In Stock
Order within the next 3 hrs and your part ships today!
Frame Screw – Part Number: WP7101P126-60
Frame Screw
★★★★★
★★★★★
(1)
PartSelect #: PS11743908
Manufacturer #: WP7101P126-60
Sold Individually.
$7.54
  In Stock
Order within the next 3 hrs and your part ships today!
Stand Mixer Screw – Part Number: WP4159193
Stand Mixer Screw
★★★★★
★★★★★
(1)
PartSelect #: PS11742292
Manufacturer #: WP4159193
This screw is sold individually.
$7.04
  In Stock
Order within the next 3 hrs and your part ships today!
Surface Burners Spark Module Kit – Part Number: 1430322
Surface Burners Spark Module Kit
PartSelect #: PS2011188
Manufacturer #: 1430322
This part sends enough current to the igniter to create a spark to the bottom of the burner cap.   No Longer Available
Burner Knob – Part Number: WP7733P045-60
Burner Knob
★★★★★
★★★★★
(2)
PartSelect #: PS11744697
Manufacturer #: WP7733P045-60
Sold Individually. This knob accepts a D-shaped shaft.
$11.89
  Special Order
Burner Spark Ignition Switch – Part Number: WP7403P190-60
Burner Spark Ignition Switch
PartSelect #: PS11744485
Manufacturer #: WP7403P190-60
Sold individually.
$62.72
  In Stock
Order within the next 3 hrs and your part ships today!
Gas Pressure Regulator – Part Number: 74006282
Gas Pressure Regulator
PartSelect #: PS2083974
Manufacturer #: 74006282
This valve automatically cuts off the flow of gas at a certain pressure.   No Longer Available
SCREW – Part Number: 3400023
SCREW
PartSelect #: PS345999
Manufacturer #: 3400023
  No Longer Available
DISCONTINUED – Part Number: 7720P146-60
DISCONTINUED
PartSelect #: PS2091675
Manufacturer #: 7720P146-60
  No Longer Available
COVER- BUR – Part Number: 7724P004-60
COVER- BUR
PartSelect #: PS2091709
Manufacturer #: 7724P004-60
  No Longer Available

Questions And Answers for CGLW821K

We're sorry, but our Q&A experts are temporarily unavailable.
Please check back later if you still haven't found the answer you need.

Common Symptoms of the CGLW821K

[Viewing 1 of 1]
Will Not Start
Fixed by
these parts
Show All
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
original light grey color grates stained and unsightly--no amount of scrubbing or cleansers would make them look nice.
Opened the box and took out the black color grates~~removed discolored grates and put the new ones on. Looks like a brand new stove and much nicer to look at as it is the first thing you see when you enter the kitchen.
Parts Used:
Burner Grate
  • Linda from Jenison, MI
  • Difficulty Level:
    Really Easy
  • Total Repair Time:
    Less than 15 mins
15 of 20 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
gas burners and gas oven would not light
unplug the oven and pull it away from the wall. looking at the oven from the back, the spark module is at the bottom on the lower left. there is a two piece sheetmetal cover over the area of the spark module. use a phillips head screwdriver to remove five screws and the covers come off. the spark module is the blue cube with four push on wire connectors. all you have to do is hold the new one next to the old one and swap one wire at a time. both were clearly marked with identical numbers and letters. really nothing to it. it took me longer to clean the back of the oven than to replace the module. the old module was eaton part number Y-54052-3. the new one is eaton part number Y-054052-34.
Parts Used:
Surface Burners Spark Module Kit
  • nicholas from livermore, CA
  • Difficulty Level:
    Really Easy
  • Total Repair Time:
    30 - 60 mins
  • Tools:
    Screw drivers
14 of 18 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
The range burners would not catch a spark and ignite. They would just keep clicking with no ignition.
I had an appliance repair rep do the replacement. He made it look relatively easy.
The repair man first turned off the breaker to the range and confirmed there was no power to the range.
After lifting off the range top cover exposing the burner igniters, he unhooked and removed the igniters. He opened the lower oven door exposing the screws which hold the front knob plate in position. He took those out. After loosening the knob plate he was able to unscrew and raise the inside cover which exposes the wires and the spark module.
My spark module was located in the front left corner area tucked a little under the knob plate. That is another reason why he had to loosen the plate. The replacement part was a universal part so he had to do a little work on the wire connectors but it only took a couple of minutes. Once he configured the wire ends, he was able to plug in the new spark module and put the top back together again.
The repair man knew exactly what to do and made it look relatively easy. I did not want to tackle this problem because I did not know exactly where the spark module was since some models have them in the back of the oven and the oven has to come out from the wall. Also, the wire connections had to be worked with a little and he knew exactly how to do that.
The repair man took about 45 minutes from beginning to end with most of that time spent getting to the part and putting it back together. The replacement itself took only about 10 minutes.
Parts Used:
Surface Burners Spark Module Kit
  • Adrienne from Lake Havasu City, AZ
  • Difficulty Level:
    Easy
  • Total Repair Time:
    30 - 60 mins
  • Tools:
    Pliers, Screw drivers
6 of 9 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!